What amp do I need for 2 12 inch Kicker L7?

What amp do I need for 2 12 inch Kicker L7?

get a kx1200. 1 and a solobaric are the perfect combo. If you have the L7 that is 4 ohm then you will wire them down to a 2 ohm load and the amp will give you 750 rms at 2 ohms. If you have the 2 ohm L7 then wire it down to 1 ohm and you will have 1500 watts max.

What size amp do I need for a 10 inch kicker sub?

The CompR 10-Inch Subwoofer works best with a sealed or ported enclosure and 400 watts of recommended power. See below for more details. *Assumes typical music program with minimal amplifier clipping; varies with enclosure size. See your KICKER dealer for details.

Does kicker make good amps?

Kicker amps are very nice amps, not a lot of people like that they only wire to 2 ohms but they are efficient and make good power. They are over priced if you are buying new models or retail prices but there are good amount floated around at good used prices.

How much power can a kicker L7 handle?

Answer: The Kicker L7 12 inch Subwoofer is a 2 ohm DVC (Dual Voice Coil) subwoofer that can handle 750 Watts of RMS power with a peak of 1500 Watts. Assuming you don’t want to damage either the amplifier or the woofers, the answer to this is yes, as long as it is wired correctly. Wiring the Kicker CX1200.

How many watts is a 12 inch Kicker L7?

Kicker 41L7122 Q-Class L7 Series 12″ Car Subwoofer, 450-900 Watts RMS, 1800 Watt Peak Power, 2 Ohm Square Sub, Dual Voice Coil, Delivers Big Mobile Audio Bass.

Is Kicker L7 a good sub?

Great Subwoofer that it is a great sub and its really powerful. this L7 hits harder and is more powerful then two comps 12″ subs from kicker. those speakers put out together 600 rms vs my 1 L7 puts out 750 rms and both were running at 2 ohms. so i do highly recommend this sub.

Are Square subwoofers better than round?

While square subwoofers have more surface area to move more air, traditional round subwoofers are generally better sounding because they are easier to control. The more accurately the subwoofer is controlled the higher the sound quality reproduced.

Is a ported box louder than sealed?

Ported enclosure: These are also called bass reflex enclosures. Ported enclosures are typically used to get more output from the same power of an amplifier than a sealed enclosure because they are more efficient. They will also have more overall output than a sealed enclosure which means they can play louder overall.

Which is better kicker or Rockford Fosgate?

If you have 35-45W RMS, the Kicker will be a better option than the Rockford Fosgate M1. If you have 75-100 watts of RMS power from your amplifier, the Rockford Fosgate M1 will be a better option.

What’s the best amp for Kicker L7?

The Massive Audio N2 Nano series amplifier is the perfect match for when looking to amplify a S8L74 L7 woofer or even two of those woofers to a final impedance of 1 ohm.

Are Kicker L7 subs good?

Are Square subs better than round?

What is the best subwoofer for deep bass?

10 Best Car Subwoofers for DEEP Bass

  • JL Audio 12W7AE-3 12″ Subwoofer.
  • Orion HCCA12 12″ Subwoofer.
  • MTX Audio Terminator TNE212D Dual 12″ Subwoofers.
  • Rockford Fosgate P300-12 Subwoofer.
  • JL Audio 10TW3-D4 10″ Shallow Mount Subwoofer.
  • Rockville RW10CA Low Profile 10″ Subwoofer.

What hits harder 10s or 12s?

But, generally speaking, given adequate power the two 10″ subs will sound a little cleaner and punch harder because their combined cone surface area yields more sound pressure. The single 12″ sub, however, may sound a little deeper.”

What hits harder ported or sealed?

Undoubtedly, ported boxes can deliver louder, booming bass with more punch and reverberance than sealed boxes. This is easily achieved with a ported subwoofer box without using any additional sound equalizer or digital processor.

How many watts is 2 12 Kicker subs?

Dual 12″ Comp Enclosure Pair the box to a DX-Series Amplifier for the best combination of power and affordability. The Comp 12-inch Loaded Enclosure works best with 300 watts of recommended power.

What amp do you need for 2 12 inch subs?

400 watts RMS per sub, that’d 800, so 150% (optimal) would be 1200 watts. 1200 watts (RMS) is what you want in an amp, look for that.

Can a 1000 watt amp push 2 15s?

Just make sure your 15″ subs have a rms rating of 1000 watts…. because under powering your subs is worse than overpowering them. And GUH. see less Yes, it will push two 15’s easily.

What is the best 12in subwoofer?

Best 12 Inch Subwoofers Table

Product RMS Watts Sensitivity
Pioneer TS-W126M 350W 96 dB
Sundown Audio SA-12 D2 REV.3 750W 83 dB
JL Audio 12W0V3-4 300W 85 dB
Rockford Fosgate P300-12 Punch 300W

How much airspace does my subwoofer need?

Each individual subwoofer requires its own amount of airspace. There are 12 inch woofers that only need . 35 cubic feet of airspace and others that require 1.5 cubic feet.

How many RMS is 1000 watts?

In this case, about 1000 watts RMS, SSL’s website rates it at 1250 RMS.

Is it better to run subs in series or parallel?

While series wiring of multiple subs increases the total effective impedance, parallel wiring of multiple loads lowers the total effective impedance. With subwoofers rated at equal impedances, the system impedance is equal to the impedance of one sub voice coil divided by the number of subs.

Is 1 ohm a lot?

A single ohm (1 Ω) is actually a very small amount of resistance. In reality, however, only superconductors have a resistance of 0 Ω. Even copper wire has some resistance. Because of that, the resistance of wire is usually measured in terms of ohms per kilometer or per mile.

What size subwoofer has the deepest bass?

15-inch subwoofers offer the most powerful and deepest bass owing to their big size. They, however, lack the tight responsiveness of their small counterparts….

  • 8-inch Subwoofer.
  • 10-inch Subwoofers.
  • 12-inch Subwoofer.
  • 15-inch Subwoofer.

What is the hardest hitting subwoofer?

The hardest hitting best 10 inch subs is the Planet Audio AC10D ten inch automobile subwoofer. It has a max power output of 1500 watts, with 750 w RMS.

Can you put a 12 inch sub in a 10-inch box?

Not likely. The box dimensions and port size are specific to not only the size of the subwoofer, but also the specific subwoofer. Two different 12″ subwoofers may have entirely different enclosure specifications, and almost always do.

How much airspace do I need for a 15 inch sub?

15 inch drivers: 5.0 to 9.0 cubic feet.

Which is more powerful 1ohm or 4ohm?

In other words, when exposed to the same amount of power, a 1 ohm speaker may blow out easily, while a 4 ohm speaker can take the load effortlessly. Consequently, 1 ohm speakers can be used for only light use. The speakers with higher ohms can also be run for longer than those at the lower end of the spectrum.

Do 10 or 12 subs hit harder?

Q: Which subwoofer will sound the deepest? But, generally speaking, given adequate power, the two 10″ subs will sound a little cleaner and punch harder because their combined cone surface area yields more sound pressure. The single 12″ sub, however, may sound a little deeper.

How much airspace does a 12 inch subwoofer need?