Users questions 

Why is my Canon mx922 not printing?

Joe Ford

Why is my Canon mx922 not printing?

Clean the printhead and perform a nozzle check to make sure that there are no canon mx922 printer problems in your printer. This printer issue can occur if you have not used your printer for a long time. If the nozzles are dry, the ink flow during the printhead movement.

Why is the orange light flashing on my Canon printer?

When an error occurs in printing such as the machine is out of paper or paper is jammed, a troubleshooting message is displayed automatically. Take the appropriate action described in the message. When an error occurs, the Alarm lamp flashes orange and a Support Code (error number) is displayed on the computer screen.

Why is my Canon printer power button blinking?

The MG2922 printer’s power light will blink continuously if the access door is open or slightly ajar. Make sure the door is completely closed and then press the black or color start button to clear the blinking.

How do I fix the orange light on my Canon printer?

CANON I250, I255, I320, I350:

  1. Turn off the printer and disconnect the usb cable.
  2. Press and hold the “Power” button and turn the printer back on.
  3. The LED must be green.
  4. Press once on “resume”, the light turns orange.
  5. Press “resume” once again and the light is green.
  6. Release the “Power” button.
  7. Reconnect the power cable.

How do I fix error code 5b00 on my Canon printer?

What can I do if I get the Canon printer error 5b00?

  1. Reset the waste ink counter. Firstly, unplug the power and the USB cables from the printer.
  2. Manually clean the waste ink pad. Open the ink cartridge compartment.
  3. Other potential solutions. If the print head is not clean, this can often lead to this error.

How do I clean my Canon printer?

Cleaning

  1. Open the printer driver setup window.
  2. Click Cleaning on the Maintenance tab. When the Print Head Cleaning dialog box opens, select the ink group for which cleaning is to be performed.
  3. Execute cleaning. Make sure that the machine is on and then click Execute.
  4. Complete cleaning.
  5. Check the results.

What is Canon error 5B00?

This Error Typically Represents Problem With Waste Link Counter OverFlowing. When this issue occurs on your Canon printer, the printer boots normally like every day but when you try to print or scan a document, the lamp starts flashing “Green” and “Orange” like 8-10 times in a row.

How do I clean the ink absorber on my Canon printer?

  1. Take a bowl with warm water and add some soapy material.
  2. Open the ink cartridge compartment.
  3. wait for ink cartridges and disconnect the printers power cord.
  4. Look balck rubber frame under the ink cartridge.
  5. pull the rubber frame out of the printer and remove ink absorber pads.
  6. clean the pads in the bowl.

What is error 5B00 on Canon printer G3000?

Canon G3000 error code 5B00 mean the waste ink counter overflow, you have to reset Canon G3000 Waste Ink Counter (clear Waste Counters). The printer will blink as follow: Orange light – 7 times.

How do I reset my Canon g3000 wireless printer?

Press and hold Wi-Fi button and release it when ON lamp flashes.

  1. Press Black button twice and press Wi-Fi button.
  2. Make sure the ON lamp changed from flashing to lit and the Wi-Fi lamp is not lit.
  3. If the ON lamp has not changed from flashing to lit, go back to step 1.

How do I fix my Canon g1000 error 5B00?

Solution 4:

  1. Turn off the printer.
  2. Press and hold the “Stop/Reset” button.
  3. Press and hold “Power On” button.
  4. While holding the “Power On” button, release the “Stop/Reset” button.
  5. While holding still the “Power On” button, press twice the “Stop/Reset” button.
  6. Release the “Power On” button.

How do I reset my Canon e460 printer?

Follow the procedure below to initialize the machine settings.

  1. Make sure that the machine is turned on.
  2. Press and hold the Stop button until the Alarm lamp flashes 21 times.
  3. Release the Stop button. All the machine settings are initialized.

How do I reset my Canon g4000 error 5B00?

Solution 1: (Get the printer into service mode)

  1. Work out where the STOP button is.
  2. Turn the printer off.
  3. Press and Hold the Power button.
  4. Wait about 2 or 3 seconds – the blue light will be on.
  5. Press the STOP button 6 times.
  6. Let go of the Power button.
  7. The blue light will now start flashing for a while.

How do I solve my Canon G2000 5B00?

To reset Canon G2000 5B00 Waste Ink Counter Error – You need to PUT CANON PRINTER IN SERVICE MODE! Then use WIC Reset Utility Tool with the Reset Key to reset your Canon G2000 printer. It takes less then 1 minute!

How do I fix my Canon printer 5200 error?

Steps to Fix Canon Printer Error Code 5200 by our expert solution

  1. Turn off your Canon printer first.
  2. Press and hold the STOP/RESET button.
  3. Press and hold Power ON button.
  4. While pressing the Power ON button, release the STOP/RESET button.
  5. Press twice the STOP/RESET button While holding yet the Power-On button.