What makes a Chevy 383 stroker?
What makes a Chevy 383 stroker?
The Chevrolet 383 Stroker is a hot rod engine never truly created in normal production for use in a specific car. The engine is essentially a Chevy 350 block, but uses a modified crankshaft from the Chevy 400 for increased stroke and as a result increased displacement.
How do you tell if you have a 383 stroker?
If the engine is internally balanced there is NO way of telling the engine is a 383 by looking. If it is externally balanced (most common) you can tell by the counterweight on the flexplate or the cut-away on the vibration dampener.
What is the best carburetor for a Chevy 350?
Top 10 Best Carburetor For 350 Chevy Engine in 2021
- Edelbrock 1406 Performer – Best Overall Carburetor For 350 Chevy.
- New Carburetor for Type Rochester 2GC – Best Affordable Carburetor for Chevy 350.
- Holley 0-1850S Model – Best Value for money Carburetor for Chevy 350.
- Jet 35002 Rochester – Best Easy to install carburetor for Chevy 350.
What are the advantages of a stroker motor?
A stroker is an engine that has been modified to increase the length of the stroke and therefore has a greater engine capacity. Its benefits are improved torque and power.
Are stroker motors reliable?
A few years ago stroker motors weren’t very reliable but with testing and redesigning now they are almost as reliable as a stock motor as long as you treat them right.
How much is a 383 stroker kit?
FULLY BALANCED SBC CHEVY 383 STROKER ROTATING ASSEMBLY WITH WISECO FORGED FLAT TOP PISTONS….Product Information.
| UPC | /th> |
|---|---|
| Shipping Cost | $95.50 |
| Number of reviews | 0 |
Why is it called a stroker engine?
A stroker engine is basically just an engine that has had the stroke increased to more than was originally from the factory. A stroker kit is a collection of components that make building a stroker engine possible. By increasing the stroke of the engine (and also the bore, too) you can increase the size of the engine.
What is the best transmission for a 383 stroker?
A 700R4 will be your best bet for an OD trans. It only has 4 gears, but GM has just recently started going with the 5 & 6 speed auto boxes, those extra gears would probably cost you a small fortune, and you’d need a PCM for the trans.
What are the best heads for a 383 stroker?
Re: what heads would be best for a 383 stroker I suggest a intake port volume of 195 to 210 cc for a strong High perf street strip 383. if you want out of the box best power the CNC ported heads make the most out of the box power. EG AFR 195 or AFR 210 Eliminators.
Are 882 heads any good?
The 882 heads are smog heads from ’74 to ’80 and not very well regarded, but neither are stock ’85 heads – if you can find out more about the 882’s they may be better than your stock ’85 heads – ie not only polished & ported but if milled so they will give higher compression and if valves were changed to 2.02 etc they …
How do you turn a 350 into a 383 stroker?
How to Convert a 350 Into a 383 Stroker
- Purchase and install a 383 stroker crankshaft, rod and 10.5-to-1 piston set.
- Install a set of four-bolt steel main caps over the center two crankshaft mains if you’re using a two-bolt-main block.
- Install a set of ported L31 Vortec cylinder heads.
Are aluminum heads better than cast iron?
Both types of heads can be damaged if the engine overheats. Cast iron is much more durable. However, aluminum heads are easier to fix. The metal is softer and easier to weld and machine.
Can you put aluminum heads on a cast iron block?
If you are installing aluminum heads on a cast-iron block, the difference in expansion rates can cause sealing problems. Because of this, composite gaskets seem to work best. There are different designs available. Just make sure whatever you use is applicable in an aluminum-head/iron-block situation.
How much horsepower will Edelbrock heads add?
After installation of the Edelbrock Performer RPM Hemi heads, the peak numbers jumped to an impressive 508 hp and 469 lb-ft of torque. The Edelbrock heads were worth 49 hp and 28 lb-ft of torque, with gains increasing past the power peak.
What is the best small block Chevy head?
One of Dart’s best heads is the CNC-ported 220cc Pro 1. This head offers excellent flow and a strong intake to exhaust balance. You can run a single pattern cam and make great power. Another excellent head that Edelbrock offers is the new E-Tec 200cc head.
Do aluminum heads add HP?
Aftermarket aluminum heads usually make more power because they are a better-flowing head design than stock.
How much horsepower do heads add?
A good set of heads w/ headers should net you 30-35rwhp, a bit more with tuning. A good set of heads w/ headers should net you 30-35rwhp, a bit more with tuning. really , thats it.
Are aluminum heads worth the money?
Yes they are worth it. Pretty much every aftermarket head is worth a good power increase over any stock head. I like the aluminum heads since they are easier to port, repairable, and give a nice weight reduction. They usually are only a few hundred more than the iron heads.