What is the plastic cover on the inside of the microwave door for?

What is the plastic cover on the inside of the microwave door for?

This is a static cling film that should peel off easily. InteriorThe inside of the microwave door is covered with a thick, clear plastic sheet that should not be removed. The purpose of this plastic is to prevent any interference with the metal screen in the door. This covering is glued on.

Is leaving the microwave door open bad?

If you leave the door open, nothing will happen. Nothing, except that the light will be on in your microwave oven. Microwave ovens are all made with an interlock switch, so that the oven can radiate its ~1100 watts of RF energy only when the door is properly closed. Fortunately, door design is foolproof.

When opening a microwave door does it open?

If your microwave continues running when you open the door, it may be a problem with the door interlock switch. The components that could stay on when the door is open, but the door switch isn’t working are the fan motor, stirrer motor, and interior light.

Why does my microwave says door?

“Door” or “Open/Close” Appearing in the Display If a message about the door appears in the display, the door has been closed for 5 minutes or more without the microwave oven being started. This occurs to avoid unintended starting of the microwave oven. Open and close the door, then start the cycle.

Why won’t my microwave door open?

If the door on your microwave oven won’t open, you may have a problem with the door latch lever. Unplug the unit and remove the cover to access the door latch lever. You may also need to remove the control panel to gain better access. Remove the broken piece and insert the new part into the pivot openings.

Where is the start button on the Whirlpool low profile microwave?

The start button is the ‘>’ button on the front of the unit.

What does F2 error code mean?

The “F2” fault code indicates the oven got too hot. Let the oven cool down before reconnecting the power cord. If “F2” displays when cold, this could indicate a faulty electronic oven control board or a faulty oven temperature sensor probe.

What does F2 mean on Maytag stove?

oven temperature sensor probe

How do you fix an F1 oven?

On some models it is possible that F1 could also be caused by a keypad problem. In this case it will specify in the tech sheet to power down the oven, disconnect the keypad then power the oven back on, wait for a few minutes to see if the error reappears. If the error reappears it is definitely the control board.

What does F5 mean on an oven?

electronic control needs to be replaced

What does F7 on my oven mean?

If you have a GE oven, the F7 error code references an issue with the buttons on the control panel. Specifically, it means that the oven believes that two buttons are pressed down at the same time. If cleaning the ribbon cable does not work, then the entire GE oven control panel must be replaced.

What does F3 mean on a Maytag oven?

oven temperature sensor failure

What does 5A6 mean on Maytag stove?

Sabbath mode

What does Sabbath Mode do?

What is Sabbath Mode on an oven? When in Sabbath Mode, your oven will disable its automatic shut-off function to stay on longer than 12 hours. This means that the oven will stay in a Bake mode until shut off, which will allow you to use the oven for cooking or warming food.

What is cook and hold on Maytag oven?

The Maytag Mer5754qaw is an electric smooth top range that offers a cook and hold feature. This setting allows you to cook food for the time and temperature you set, and then it automatically changes over to hold mode for an hour to keep food warm.

How do I turn off Sabbath mode on my oven?

You can turn the oven off at any time by pressing the CLEAR/OFF pad. This will turn only the oven off. If you want to deactivate the Sabbath feature, hold down the CLOCK and TIMER ON/OFF pads at the same time for 3 seconds. (“Sab” will disappear from the display.)