What FM covers the M4?
What FM covers the M4?
FM 3-22.9
Which of the following items should be used to clean the recoil spring?
which of the following items should be used to clean the recoil spring and recoil spring guide? Clean recoil spring and recoil spring guide using CLP and a soft brush or cloth. After wiping the recoil spring and recoil spring guide clean, apply a light coat of CLP/LSA.
What is the first step in receiving a weapon M9?
Ensure the pistol is in Condition 4. What is the first step when receiving a weapon? Ensure the pistol is on safe.
What is incomplete locking M9 pistol?
What is incomplete locking? Slide does not fully lock into battery due to weapon, magazine, or ammunition malfunction.
How many safety devices does the M9 have?
three M9
Does a 9mm Beretta have a safety?
The Beretta M9 has redundant automatic safety features to help prevent unintentional discharges. It can be fired in either double or single action mode and can be unloaded without activating the trigger while the safety is in the “on” position.
What is the maximum range of the M9 service pistol?
100 m
What is the only authorized ammunition for the M11 service pistol?
1-3. M9 and M11 pistols use several different types of 9-mm ammunition. Use only authorized ammunition manufactured to US and NATO specifications.
What condition should the weapon be in when returned to the armory?
What condition should the weapon be in when returned to the armory? An operating or maintenance procedure, practice, condition, statement, etc., which if not strictly observed, WILL result in serious injury to, or death of personnel, or threatens the primary mission of the ship.
What is the life expectancy of the M9 service pistol?
15,000 Rounds
What does the Decocking safety lever in the up position indicate?
What does the decocking/safety lever in the Up position indicate? Weapon is ready to fire.
When clearing a stoppage during a handgun practical weapons course the shooter should do which of the following?
When clearing a stoppage during a Handgun Practical Weapons Course, [ the shooter should do the following immediately AFTER removing finger from trigger: Engage decocking/safety lever. ]
How many cycles of operation are there for the M9 service pistol?
eight steps
Which component of the M9 houses the firing pin and extractor?
The Slide and Barrel Assembly houses the firing pin and extractor and cocks the hammer during the recoil cycle. The barrel houses the cartridge for firing and directs the projectile.
When clearing a stoppage during a handgun practical weapons course the shooter should do which of the following immediately after removing finger from the trigger?
2 Clearing a Stoppage During a Practical Weapons Course When a shooter experiences a stoppage during a practical weapons course, the following steps shall be immediately followed: 1. Remove finger from trigger and place it straight alongside the receiver. Feeling stuck? You’ve reached the end of your free preview.
Which weapon carry is used when contact with enemy is imminent?
There are two carries with the pistol: the Alert and the Ready. The carries permit quick engagement when necessary. Alert Carry – used when enemy contact is likely (probable). Ready Carry – used when there is no target, but contact with the enemy is imminent.
Which of the following safety features interrupts the forward movement?
Half-Cock Notch
What is operational cycle?
This module explains the series of steps which occur between successive shots in any given firearm design. The order in which they occur depends on the type of action which the gun employs (lever, bolt, pump, break-open, revolver etc…). This series of steps is called the “Cycle of Operation”.
Which safety feature interrupts the forward motion of the hammer during a mechanical failure but is overridden when the trigger is pulled to the rear?
As the trigger is pulled, the firing pin block moves up and out of the firing pin notch. This movement allows a round to be fired when the hammer strikes the firing pin. The Half-Cock Notch interrupts forward movement of the hammer during a mechanical failure.
What are the 8 cycles of function?
The eight cycles of functioning (feeding, chambering, locking, firing, unlocking, extracting, ejecting, and cocking) begin after the loaded magazine has been inserted in the weapon.