How do you reset the security system on a 2003 Oldsmobile Alero?
How do you reset the security system on a 2003 Oldsmobile Alero?
Turn ON the ignition, with the engine OFF. Attempt to start the engine, then release the key to ON (vehicle will not start). Observe the SECURITY light, after approximately 10 minutes the light will turn OFF. Turn OFF the ignition, and wait 10 seconds.
How do you turn off the theft system on a Pontiac Grand Am?
Turn the key to the on position for 10 minutes then turn off, repeat 2 more times. the system should reset. Mine usually resets on the second time, if the security light stops flashing then i try to start. My mechanic told me it takes three times to reset but it never has on my car, good luck.
How do I reset my Chevy security system?
Insert the ignition key and turn it to the on position and then attempt to start the engine (crank over), the engine wont start. With the key still in the run position wait 10 minutes and the security light should blink and then go out. Turn the key off and wait 5 seconds.
Why is my security light on?
On your particular vehicle the security light staying on as the vehicle is running is an indication that the security system has failed and is disabled. It is common for a security light to come on after battery dies because the computer may lose its programming to the key.
How do I turn my security light off?
Step 2: Turn your light switch on and off quickly, hitting each position four times. When the light comes on, turn the switch to the off position and wait five to seven seconds before turning it on again. The light should remain off and the motion detection unit should be reset.
Will disconnecting battery reset security light?
One last thing you can try if your car alarm is going off and you can’t get it to stop, but you can get under the hood is to disconnect the battery. By unplugging the battery for a few minutes, it will also reset the computer. All you have to do is disconnect the positive or negative terminal and wait.
What does the red security light mean?
security error code
What does the security light mean?
antitheft system
Why does my anti theft light keep blinking?
Is the theft light flashing rapidly? If the theft light is flashing rapidly, you have an issue with the alarm system. (bad key, bad antenae in the key hole, wiring issue) If the car is turning over, but not starting and the theft light is steady, I would check your crankshaft position sensor.
What does red dot mean on dashboard?
The flashing red light is a security light to keep things safe. There are other blinking red LED lights on the dashboard as well. Other color LED lights also come active when the door is left open. The red light blinking in car is of the anti-theft system.
What does red dot on Dodge Charger mean?
Vehicle Security Light
How do you know if your car is in theft mode?
If the security or anti-theft light is flashing when you attempt to start your car, and the engine does not crank or does not start, you have an anti-theft problem. The system may not be recognizing your key or keyless entry signal, or there may be a fault in the anti-theft module, keyless entry system or wiring.
How do I turn off the Immobiliser light?
Turn the key to unlock your car door, but don’t release it. Hold the key in this position for 20 to 30 seconds. This lets the system know you have the correct key, and it can allow you to bypass the alarm system. Some vehicles recognize the key simply by turning the key back and forth in the door lock key cylinder.
How do I know if the Immobiliser is on?
What are the Common Symptoms of Immobiliser Problems in Car
- Locking problems.
- Unlocking problems. Another signs of immobiliser problems is, you unable to unlock the doors of your car with the smart key.
- Engine starting problems. The most common sign of a problem in the engine immobiliser in your car is that it does not start at all.
- Ignition key does not turn.
- Final words.
How do I know if my car is fitted with an Immobiliser?
You can rest assured that your car has a factory-fitted immobiliser if it was manufactured after October 1998. However, if your car was made before that date and you want to check if it has an immobiliser, the easiest way to check is to contact your car’s manufacturer or consult your owner’s manual.
Where do I find my EKA code?
The EKA code is found on the security information card supplied with your vehicle. The code is 4 digits long. The EKA code IS NOT the code in the key fob.