Users questions 

How do I program my Cox basic remote?

Joe Ford

How do I program my Cox basic remote?

Just follow these steps to connect your remote to your TV:

  1. Turn on your TV.
  2. Press and hold the setup button until the power button blinks twice, then release.
  3. Press and release the power button.
  4. Press and hold Select until your TV turns off, then release.

How do I program my RCA 3 remote?

Auto Code Search

  1. Manually turn on the device you want to control.
  2. Press and hold the DVD•VCR key.
  3. Press and hold the device key you want to program.
  4. Wait until the POWER key comes on and stays on.
  5. Point the remote directly at the front panel of the device you want to control.

How do I reset my URC 8820 Remote?

  1. Press and release the TV button.
  2. Press and hold the Mute and Select buttons at the same time until the TV button blinks twice.
  3. Release both buttons.
  4. Press the Vol+ button.
  5. Press and release the TV button.
  6. Test and verify that the volume is now being controlled on the TV.

How do I reset my COX voice remote?

Perform a Factory Reset as follows:

  1. Press and hold the Setup button on the Cox remote for three seconds, until the red LED on the remote turns green.
  2. Enter 9-8-1. Result: The LED blinks green twice to indicate the remote has been reset.

Why is my DStv remote not working?

Reset DStv remote Hold down both the ARC and Standby for about 3 seconds. During this step, the remote lights should change to amber. Continue holding the ARC button as you release the Standby. While you are still pressing the ARC button, dial 9499.

How do I set up Cox Voice Remote?

Turn on your TV. Press and hold the setup button until the power button blinks twice, then release. Press and release the power button….Become a Voice Remote pro

  1. Tap the A button twice to bring up the Voice Guidance screen.
  2. To turn it on, press “Turn On Voice Guidance”
  3. To turn it off, press “Turn Voice Guidance Off”

How do I pair my XR15 remote to my cable box?

To use your XR15 remote to control your TV Box/streaming device:

  1. Make sure the remote batteries are installed and your TV and TV Box/steaming device are powered on.
  2. Set the TV input to the input connected to your Xfinity TV Box/streaming device.
  3. Press and hold the xfinity and Info (i) buttons together for five seconds.

Is there a Cox remote app?

The Cox TV Connect App allows you to watch TV programming in real time from your mobile device or computer while connected to the Cox network from your home. This app is available to Windows Desktops & Laptops, Mac Desktops & Laptops, Apple devices, and Android devices.

Why is my Cox remote blinking red?

The LED blinks red once for all TV and audio device commands. If the remote LED blinks red after a command to the receiver, such as pressing the GUIDE button, the remote is in IR mode. Unpair and re-pair the remote and receiver for RF operation.