Users questions 

How do I disable GM Anti-theft system?

Joe Ford

How do I disable GM Anti-theft system?

How to Disable a GM Passkey System

  1. Insert your GM key into the ignition, attempt to start the car, and let it stall. After it stalls, leave the key in the starter in the “On” position.
  2. Look at the “Theft Sys” light blinking on your dashboard and wait until the light stays on without blinking. This will take from 10 to 15 minutes.

How long does it take for PassLock to reset?

approximately 10 to 15 minutes

How do I relearn PASSLock?

GM VATs Relearn

  1. Insert a master key (black head) into the ignition switch.
  2. Turn key to the “ON” position without starting the engine.
  3. Wait for 10 minutes or until the security light turns off.
  4. Turn key to the “OFF” position for 5 seconds.
  5. Turn key to the “ON” position without starting the engine.

How do I reset my security system?

Step-by-Step Guidance

  1. Find your security system status button.
  2. Find the manufacturer’s website for install instructions.
  3. Locate the power source to the main control panel.
  4. Disconnect back-up battery.
  5. Leave power off for a minimum of 5 minutes.
  6. Reconnect battery leads.
  7. Press keys (*) (#) at the same time.
  8. Key in your code.

How do I turn off the anti theft system on my Honda Civic?

If the alarm has been activated in a Honda Civic, press the panic button on the key fob. If that doesnt work, try putting the key in the drivers door and rotate the lock to the left and then to the right. Either of these methods should turn the alarm off.

What is anti theft system Honda Civic?

Immobilizer Theft-Deterrent System: An immobilizer theft-deterrent system is standard on the Honda Accord and Civic models. The system uses an ignition key with a built-in transponder. The car key carries a transponder code which must match a code in the vehicle computer. If they don’t match, the engine won’t start.

What is immobilizer anti theft system?

An immobiliser or immobilizer is an electronic security device fitted to a motor vehicle that prevents the engine from running unless the correct key (transponder or smart key) is present. This prevents the vehicle from being “hot wired” after entry has been achieved and thus reduces motor vehicle theft.