How can you tell how old a clawfoot tub is?
How can you tell how old a clawfoot tub is?
Look at the underside of the tub for a mold number. If you don’t find one, search around the faucet and spigot fixtures and on the inside of the clawfoot. A mold number will help you find out who the manufacturer was, which will help you date the tub’s approximate year of origin. Check the tub’s rim.
How much are old clawfoot tubs worth?
Interestingly, most antique clawfoot tubs that you can find for sale have already been refurbished, and so they’re a little more expensive than an untouched tub is going to be. For example, a restored 5′ clawfoot tub was sold for $1,000, and a refinished 6′ clawfoot tub from 1926 sold for about $2,500.
Are old cast iron tubs worth anything?
Short Answer: Depending on your cast iron bathtub’s weight and condition, it may be valuable either for resale or scrap. Cast iron bathtubs are generally worth up to $50 at scrap yards. Tubs in good condition can bring anywhere from about $300 to $2,500 on the resale market.
Are clawfoot tub feet universal?
Here is a set of Clawfoot tub replacement feet that will work on most tubs manufactured within the last 100 years. These Lions paw styled, universal replacement clawfoot tub feet will be sure to add a stunning element of class to your bathroom.
Can you change the feet on a clawfoot tub?
A clawfoot tub is a classic style usually made from cast iron. It requires help to move or to replace clawfoot tub feet. Clawfoot tub feet are separate from the rest of the tub, but that doesn’t make replacing them any easier.
Why do bathtubs have claw feet?
The clawfoot tub, which reached the apex of its popularity in the late 19th century, had its origins in the mid 18th century, when the ball and claw design originated in the Netherlands, possibly artistically inspired by the Chinese motif of a dragon holding a precious stone.
How do you get rid of clawfoot tubs?
Use your sledgehammer to pound on the tub. Strike until the tub starts to break into pieces. Continue until you have broken the tub into pieces that are easy to remove and dispose of.
Why are clawfoot tubs popular?
Bathtubs provide a place to de-stress. As a result, clawfoot tubs have become more popular as well. They not only provide a beautiful look to a bathroom, they also supply a great place to soak away your worries.
Which is better cast iron or acrylic clawfoot tub?
Acrylic tubs are lighter, stronger and easier to install than cast iron tubs. A cast iron tub requires more floor support, more labor to install and is more expensive to transport. Also, the natural warmth and thickness of acrylic tubs combine to preserve heat much longer than a cast iron tub.
Where do clawfoot tubs drain?
Source and drain lines come through the floor. In a typical clawfoot tub installation, both the water source pipes and the drain pipe enter the bathroom through the floor.
Can you put a clawfoot tub on ceramic tile?
If your claw-foot tub is likely to cause damage to your tile floor, you’ll probably notice the trouble right away in the form of scratches on the enamel surface of the tile.
What kind of paint do you use on a clawfoot tub?
Paint the tub. Oil based paints or exterior paints are a good choice for withstanding the damp bathroom. I used this exterior paint in a satin finish. Brush, roll, or spray the paint, careful to avoid brushstrokes. Once dry, sand lightly (if needed) and clean before applying a second coat of paint.
How do you stop a clawfoot tub from moving?
Carefully set the tub back into position and adjust the feet adjusters as necessary. Once level, apply a generous bead of silicone on the bottom of the feet. This will prevent the tub from shifting after installation.
How do you cut a cast iron clawfoot tub?
Lesson learned: use a masonry abrasive cutting wheel on the inside of the tub to first cut cleanly through the porcelain. Then use a metal cutting disc to cut through the cast iron in order to avoid large chips.
How do you shim a cast iron tub?
Getting the shims in is pretty easy. I reach through the stud cavity at the head and foot of the tub with a pry bar to lift the tub and then put a 2 x 4 under the apron so tub is off it’s feet. then i put the shims under the feet and lower the tub back onto the feet.
Can a cast iron tub be broken up?
Remove a Cast Iron Tub in 1 Piece If you cut the silicone bead and still can’t get the tub to budge, you may have to break the walls that hold the tub there. Sometimes people want to relocate or reuse an old cast iron tub and it is doable, but you’re going to need some man power because of the sheer weight of the tub.
What can I do with an old cast iron tub?
The tub can be used as a planter, outdoor furniture, indoor furniture and many other transformations.
- Turn it into a planter in your garden.
- Transform it into an outdoor sofa.
- Transform it into a chaise lounge.
- Turn it into a couch.
- Upcycle it into a chair.
- Transform it into a coffee table and planter.
How long do cast iron bathtubs last?
15 to 20 years
Is Cast Iron hard to cut?
Cast iron is very tough and durable, and has been used in building construction for several hundred years. But when cutting through solid cast iron, a saw or cutting tool with a diamond saw blade is the best choice to make a cut in a straight line.