Are 5.2 and 5.9 transmission the same?
Are 5.2 and 5.9 transmission the same?
There not interchangeable. Other then that,it’s the same. Ask for the build sheet for the 5.2 and the 5.9 then you’ll know the difference.
How do I identify my Dodge transmission?
Look inside the truck cab on the driver’s side to see if there is a clutch pedal. If there is a clutch pedal, this means that the Dodge Ram has a manual transmission. If there is no clutch pedal, then the truck has an automatic transmission.
Will a 727 transmission fit a 318?
a small block 727 will fit a small block 318….
Are 727 transmissions any good?
When speaking of automatic transmissions, the Chrysler A-727 or TorqueFlite 8 units are not only easy to find because of their many years of use, but they are also very strong and can be used in many performance and non-Chrysler applications, as well.
Will a 5.7 Hemi bolt up to a 727 transmission?
Re: 727 adaptor for a 5.7 hemi So any Small Block Chrysler transmission, be it a 727, 904, 998/9, 500, 518, etc will bolt right up. Be sure you have the proper flexplate and converter for the application of course.
Will a 727 transmission fit a 360?
You need a flexplate or converter for a 360 to make it work. You go and stick a 318 torque converter behind a 360 or vice versa..and you will shake like no tomorrow…and take out your main bearings…. You need a small block 727 as well…they are longer than 904 so you need shorter drive shaft..
How long is a 727 transmission?
A-727 (36RH, 37RH)
| Style | A | B |
|---|---|---|
| Small Block | 34 3/8 in. | 16 in. |
| Big Block | 34 1/2 in. |
Are all 46RE transmissions the same?
All 46Re’s are not the same. Basically, the short form is that ’96-99 Dakota and Durango interchange.
How much horsepower can a 904 transmission handle?
As everyone has said, a properly built 904 will take that 360 without an issue. For example, there are guys running 904’s behind big blocks “with an adaptor” in super stock classes. The 904 is a much lighter, and less restrictive trans compared to the 727.
How much horsepower can a 727 handle?
600 hp
What is a 904 transmission?
In 1960, the Chrysler Corporation first introduced the aluminum 904. Its design has mostly evolved from the earlier version of Chrysler PowerFlite, which is a two speed automatic with the cast-iron three-speed TorqueFlite. This design is quite heavy and yet highly durable.
How much does a 727 transmission weight?
Gearing for the 727 is 2.54:1 for 1st gear, 1.54:1 for second, 1:1 for third and 2.21:1 for reverse. The weight of the transmission is a hefty 161 lbs.
How much does a 440 weigh?
| Engine | Weight |
|---|---|
| Mopar 360 “LA” | 550 |
| Mopar 400 “B” V8 | 620 |
| Mopar 413-426W-440 “RB” V8 | 670 |
| Mopar Street Hemi | 765 |
How much does a 5.9 Magnum weight?
RE: What does a 360 long block weigh? I was reading about this recently at the Cummins web site and they said a 5.9 liter Cummins diesel weighs 970 lb, whereas the magnum 360 V-8 weighs 540 lbs.
What is the fastest Hemi engine?
Mopar is unleashing the most powerful production muscle-car engine ever available to builders and enthusiasts with the launch of its newest crate engine – the 807-horsepower Hellcrate Redeye 6.2-liter Supercharged HEMI® V-8 engine.
Is a Dodge 440 a Hemi?
But few did. Of the nearly 251,000 Coronets sold in 1966, only 738 were Hemi equipped. The rarest is the Hemi-powered Coronet 440 convertible (440 was the trim level not the engine). Only six were built.
What is the rarest Dodge Challenger?
These Are The Rarest Dodge Muscle Cars Ever
- 1 2021 Dodge Challenger Mopar Drag Pak.
- 2 2020 Dodge Challenger 50th Anniversary Edition.
- 3 2020 Dodge Charger Daytona 50th Anniversary Edition.
- 4 2018 Dodge Challenger SRT Demon.
- 5 2015 Dodge Challenger SRT Hellcat VIN0001.
- 6 2010 Dodge Viper SRT10 ACR-X.
- 7 1970 Dodge Challenger R/T Convertible Hemi.
What is the rarest Mopar muscle car?
Dodge Coronet R/T 426