What is forklift nameplate?
What is forklift nameplate?
The nameplate (also called the data plate) provides important information for the forklift operator, including the fuel type, forklift weight, and capacity. Operators should read the nameplate to know the forklift’s capabilities and limitations.
What is a capacity plate on a forklift?
According to the Occupational Safety & Health Administration (OSHA), a standard forklift capacity plate is a nameplate that contains the capacity of the lift truck, where the capacity is defined as “the manufacturer’s guideline for how much weight a forklift can safely lift.”1 The nameplate contains a host of …
When should a forklift be inspected?
Federal OSHA requires that forklift vehicles have to be inspected at least daily, or after each shift when used around the clock. You will find this requirement in the Powered Industrial Truck standard at 1910.178(q)(7). OSHA does not require that forklift inspections be documented.
How often should I service my forklift?
Every 200 hours
How do you lubricate a forklift chain?
Replace entire chain if any links are broken or cracked. Install the chains; then use a 1″ paint brush and lubricate both sides of chains with SAE-20 engine oil. Wipe off excess oil with a clean cloth. Adjust chains so fork carriage is level and all slack is removed from the lift chains.
How do you clean a forklift chain?
Chains can only be cleaned by means of paraffin derivatives, such as petroleum or diesel oil. Never clean the chains with a high-pressure cleaner, air spray or chemicals. Never re-lubricate the chain while it is under tension, as this will prevent the lubricant from reaching in all crevices and openings.
How high should your forks be when driving forklift?
6 to 10 inches
Why are forklifts dangerous?
There are many factors that explain why forklifts are dangerous: Forklifts are heavy. The weight of a forklift is unevenly distributed, which makes it harder to operate and drive. The rear wheels of a forklift are responsible for turning the vehicle, increasing the chances of tipping during tight turns.
What is the distance that I keep away from a forklift?
Pedestrian exclusion zones should be enforced within a three metre radius of a forklift. This distance should expand when the height of the forklift load or the speed travelled increases.