How do I snake my main sewer line?
How do I snake my main sewer line?
How to clean out a main sewer line clog
- Step 1: Loosen the cap on the drain pipe. Loosen the cap on the drain pipe.
- Step 3: Feed the auger cable into the drain pipe.
- Step 4: Run the auger until the clog is clear—and beyond.
- Step 5: Hose down the pipe and auger cable.
- Step 6: Slowly pull the auger back out of the pipe.
Where is the main drain located?
In a Bathroom or Utility Area In other homes with slab foundations, the main drain may be located in a bathroom, usually on the floor near the toilet, or in a garage or utility area, usually near a floor drain.
How do sewer lines get clogged?
Sewer line blockages are usually caused by a broken sewer pipe or tree roots that have grown into the pipes. Tree roots are also a common culprit busting through the pipe and growing into it, blocking the flow. It’s also possible a severe clog such as years of grease buildup has blocked the pipe.
How do you use a main line drain cleaner?
General Use: This product is intended to be used completely in one application. Pour the entire gallon into drain. After 8 hours, flush with hot water for five minutes. If problem persists, a second gallon of Main Line Cleaner may be required.
Is Main Line Cleaner Safe?
Yes, Main Line Cleaner is safe for PVC pipes and all plumbing pipes.
How do I get rid of sludge in my sewer line?
Pour baking soda into your drain on a monthly basis. Baking soda is slightly caustic and will eat away grease particles that are stuck to the side of your sewer line. Add white vinegar to baking soda for a bubbly sewer line cleaner.
Where is my sewer line in my yard?
Go to the city office directly or call them to see if they can tell you where the sewer line is located. Usually, they can show you where the line goes from your home to the city’s main line. If you are unable to reach the city, see if there is an interactive underground utility map of your area online.