What is the default gateway?
What is the default gateway?
A default gateway is the node in a computer network using the internet protocol suite that serves as the forwarding host (router) to other networks when no other route specification matches the destination IP address of a packet.
Can a switch be a default gateway?
The default gateway on a switch has the same function as any gateway configured on a host PC. Without a default gateway, the switch management address (on VLAN 1 in your case, but it could be on any VLAN configured on the switch) cannot send traffic off its network to another network.
Does each VLAN need its own default gateway?
If you want your devices to talk on the only vlan 3 then you shouldn’t have to worry about a default gateway. As long as the switches are directly connected to one another. on the same vLan they should not need a default gateway, if you wanted to ping say from 192.168. 3.100 to 192.168.
How do I change the default gateway on a VLAN?
- Assign an IP address for each router and client workstation.
- Assign an IP interface for each subnet attached to Alteon.
- Configure the default gateways.
- Add the VLANs to the gateways and enable them.
- Apply and verify your configuration.
What is the difference between IP address subnet mask and default gateway?
The default gateway always resides in the same subnet as the end device IP. The gateway can really be any unique address within the subnet itself, but most network administrators designate the first number of the subnet as the gateway. Therefore, 192.168. 255.0 subnet mask.
What is the default subnet mask for 192.168 XX IP?
255.255.0.0
Can a router have multiple gateways?
No, it can’t have more than one active default gateway. Any operating system can have multiple default gateways configured (technically a route to the unspecified address, i.e. 0.0. In that event, it does what it would do for any route destination with multiple paths.
What is the difference between ONT and modem?
3 Answers. Short answer: no, an ONT is no modem. Modem is short for MOdulator/DEModulator and the term is only used for three device classes: telephone modems, DSL modems, and cable modems (thx Cody). An ONT is an Optical Network Terminator, it connects the ISP’s (passive) optical network with your LAN.