What is a refrigerator damper?
What is a refrigerator damper?
The damper is a small flap that controls the flow of air from the freezer to the refrigerator. It is usually found in the top of the fridge or on the back panel near the top. The damper is controlled by a thermostat, which triggers it to open and close depending on the temperature of the air in the refrigerator….
How much should a refrigerator temperature vary?
When checked first thing in the morning the normal temperature range should be between 34-42 degrees Fahrenheit in the refrigerator section and between -5 and +8 degrees Fahrenheit in the freezer section for self-defrosting models, and 5 to 7 degrees for non self-defrosting models.
How long should a refrigerator defrost cycle last?
approximately 25 to 45 minutes
Is there a reset button on a GE refrigerator?
GE refrigerators do not have a reset button. Usually, resetting a GE refrigerator involves pressing a few buttons simultaneously or in a specific order, as detailed above. It is also important to note that the resetting steps may differ across different GE refrigerator models….
How do I reset my GE refrigerator after power outage?
Reset the refrigerator control by unplugging the unit or turning off the circuit breaker if the control lock will not unlock even after pressing and holding the “Lock” button. Wait 30 seconds and restore power or reset the circuit. This will perform a control reset and should restore function to the control panel lock….
Why is my General Electric refrigerator not cooling?
Check the condenser coils to determine if they are dirty—if the condenser coils are dirty, clean them. The condenser fan motor draws air though the condenser coils and over the compressor. If the condenser fan motor is not working properly, the refrigerator won’t cool properly.
How do I unlock my GE refrigerator control panel?
Turn off the power to the appliance for five seconds and up to 30 seconds to reset the control panel. This can be done either by unplugging the refrigerator at the wall or circuit breaker. Turn the power back on to reset the control….