Is American Standard a good toilet?
Is American Standard a good toilet?
The American Standard Cadet 3 toilet is designed for delivering high-performance with fewer clogs, making it one of the most reliable toilet flushing systems in the industry. The two-piece toilet is equipped with a cadet® flushing system that produces a longer and more reliable flush.
Which is better one piece or 2 piece toilet?
Performance-wise, there is no difference between the one-piece and two-piece toilets. They can have the same flushing power and efficiency. The interior parts are almost identical if they are from the same manufacturer. They may even have the same features and specifications.
Will an elongated toilet replace a round toilet?
An elongated toilet seat will technically fit on a round toilet, but the fit and comfort may be compromised. An elongated toilet seat will likely overhang a round toilet which may be fine unless the rim of the toilet is visible within the opening of the toilet seat.
What is the difference between a 10 inch and 12 inch rough in toilet?
Those numbers are a measure of the distance between the wall and the center of the closet flange (aka, where the johnny bolts that secure the toilet bowl go). Most toilet bowls will work with either a 10″ or a 12″ distance, but a 10″ rough tank is slimmer to allow for the decreased distance.
Should a toilet tank touch the wall?
No, there is no standard distance a toilet tank should set out from the wall. There are standard rough in distances, the most common is 12″ with a few at 10″ and a few at 14″, but the actually distance the tank will be from the wall will vary.
How far from the wall should a toilet rough in Be?
12 inches
Should the back of the toilet touch the wall?
When installing a toilet, there is not a specific distance that the toilet tank should be from the wall. Whether your toilet is one inch from the wall or touching the wall directly, it is really up to your preference.
Does a toilet have to be on an outside wall?
Depending on the run of the joists, there may be real issues with the location of the toilet and yes, inter alia, the outside wall is often the best location. The pipe from the toilet is the biggest single waste pipe, the flushed water makes a lot of noise and an uninsulated pipe can also attract moisture.
What is the purpose of an offset toilet flange?
For the waste water line, an offset toilet flange will allow you to move the toilet a couple of inches in any direction without having to cut a new hole in the floor or reconstruct the waste water pipe.
What is the best offset toilet flange?
The Best Toilet Flanges of 2021
- SIOUX 889-GPOM. Best Offset Toilet Flange.
- Oatey GIDDS- Replacement Flange. Most Popular Toilet Flange.
- Flexon Toilet Flange – Includes Spacer System. Best Toilet Flange for High Subfloors.
- NEXT BY DANCO (10672X) HydroSeat Toilet Flange.
- Oatey 42255 Closet Flange, 4-Inch, Cast Iron.
How many inches does an offset toilet flange move?
If your rough in isn’t 10, 12, or 14 inches, you’ll need to replace the current flange with an offset flange before you install your toilet. An offset flange can move the opening of the pipe from 11 inches to 10 or 12 inches, for example.
Does the toilet flange sit on top of tile?
The toilet flange needs to be on top of the finished floor. Meaning the bottom edge of the flange needs to be on the same plane as the toilet. So if your toilet sits on the tile, the flange needs to be on top of the tile too. The spacing of the toilet exit “horn” and sealing surface is designed for this height.