How much does it cost to rent a cement mixer?
How much does it cost to rent a cement mixer?
But you’ll need to rent a mixer, which adds another $40 to $60 per day. While ready-mix reduces work, it also boosts the cost. Each cubic yard costs about $65.
Does Home Depot rent cement mixers?
We offer concrete mixer rentals and saw rentals, including concrete saws, masonry saws, miter saws, tile saws and gas chainsaws from our selection of trusted professional-quality top brands. When you rent our cutting and concrete equipment from The Home Depot, you’ll save time and get the job done quickly.
Is it worth buying a concrete mixer?
If you’re doing a simple crack repair or pouring concrete in a small area, you don’t need a concrete mixer. If your project is much bigger, then consider a concrete mixer. This will not only make it easier to mix your concrete but also to pour it, as mixers often offer both functions.
How many bags of concrete are in a 9 cu ft mixer?
two bags
What size cement mixer should I buy?
If you are not a professional and you only have a single masonry project, go for an electric cement mixer with a capacity of 120 litres. While you can purchase a cement mixer with a 60-litre drum a larger capacity will be the better choice given the minimal price difference.
How many 80lb bags of concrete make a yard?
45 bags
How many 80lb bags of concrete do I need for a 10×10 slab?
For a 10 x 10 slab, you would need 77 60-pound bags or 60 80-pound bags.
How many bags of cement do I need for 1 yard?
5 Bags
Is it cheaper to buy premixed concrete?
It’s cheaper to do all the prep and buy the concrete premixed and delivered. For example, a 10×20′ slab of 4″ concrete would be a minimum of 2.5-3 yards. Here concrete is about $80/yard (closer to $70), or $240 for the concrete. That same slab would take 223 40-pound bags, or 112 80-pound bags.
What is the cheapest way to make concrete?
You can get cheaper concrete by purchasing sub-grade concrete. This usually is available at salvage yards and is clean material. Therefore, you don’t have to worry you’re not getting quality material. You’ll save a lot of money on concrete, and you’ll be doing your part for the environment by using reclaimed materials.
Do I need gravel under concrete?
Whether you pour concrete for a walkway or patio, a strong gravel base is required to prevent the concrete from cracking and shifting. Gravel is especially important in clay soil because it doesn’t drain well, which results in water pooling under the concrete slab and slowly eroding the soil as it finally drains.
Can you pour concrete over dirt?
Long story short, yes you can pour concrete over dirt.
Should you put plastic under concrete?
A concrete vapor barrier is any material that prevents moisture from entering a concrete slab. Vapor barriers are used because while fresh concrete is poured wet, it’s not supposed to stay that way. It needs to dry and then stay dry to avoid flooring problems. This is why a vapor barrier under concrete is essential.
What is better for concrete patio rebar or mesh?
wire mesh, the short answer is: use both! Concrete driveways that need to carry a heavy load should have both rebar and wire mesh to reinforce the concrete. For a patio, you might be able to get away with using welded wire mesh. But remember, all concrete will crack and all concrete will shrink.
How much does it cost to pour a 12×12 concrete slab?
How much does a 12×12 concrete slab cost? The average cost to pour a 12×12 concrete slab that is 4” thick is between $888 and $1,584, with professional labor and materials included.
What is the difference between a concrete slab and a cement slab?
What is the difference between cement and concrete? Although the terms cement and concrete often are used interchangeably, cement is actually an ingredient of concrete. Concrete is a mixture of aggregates and paste. The aggregates are sand and gravel or crushed stone; the paste is water and portland cement.
How much is a 10×20 concrete slab?
Cost of concrete per square foot
| Slab Size | Square Feet | Average Cost |
|---|---|---|
| 10×20 | 200 | $1,200 |
| 12×12 | 144 | $864 |
| 15×15 | 225 | $1,350 |
| 16×20 | 320 | $1,920 |
How much would a 4 inch slab of concrete cost?
Concrete Work Cost by Thickness
| Thickness | Typical Cost With Labor |
|---|---|
| 2” | $4.55 per square foot |
| 4” | $5.35 per square foot |
| 5” | $5.80 per square foot |
| 6” | $6.20 per square foot |
Is it cheaper to lay concrete or pavers?
As far as installation costs and concrete costs go, poured concrete is technically the most affordable per square foot. However, even though the upfront cost of pavers is higher, concrete pavers offer greater value and durability than poured concrete and stamped concrete.
How thick does a concrete slab need to be?
4 inches
Can I pour a 2 inch concrete slab?
A: Concrete is typically applied at a thickness of 2 inches or more, but the thicker it is, the stronger the slab will be. Four inches is most common for a slab. Products labeled “High Strength Concrete Mix” are ideal for these types of applications.
Does a patio add value to a house?
Outdoor rooms A dining area, dry laid patio, a patch of gravel, a covered patio or an above-grade deck: According to SmartMoney.com, a landscaped patio raises the value of your home by 12.4 percent.
What lasts longer concrete or pavers?
Poured concrete lasts up to 25 years and longer. Pavers last up to and beyond 50 years, thanks to their stronger material and simpler repair process. The exact time depends on the materials used, climate, and proper installation.
What is the least expensive patio material?
Concrete patios
How can I make an inexpensive patio?
Check out the cheapest patio material here to find some great ideas for your green space!
- Concrete. Concrete is a simple, inexpensive material for building your patio.
- Gravel. Gravel is one of the most inexpensive patio material options.
- Pavers. Nothing quite beats the elegance of a natural stone patio.
- Brick.
What is the easiest DIY patio?
Bricks or pavers in straight or gently curving patterns typically work well for an easy DIY patio. Flagstones, with their irregular shapes, are perfect for an informal patio with natural appeal.
How much is a 12×12 patio?
Installing a patio costs anywhere from $5 to $50 per square foot. Most people pay in the range of $8 to $20 per square foot….Cost to Put in a New Patio by Size.
| 7×7 | $250-$2,500 |
|---|---|
| 10×10 | $500-$5,000 |
| 12×12 | $750-$7,200 |
| 16×18 | $1,450-$14,500 |
| 20×20 | $2,000-$20,000 |
How much does a 10×10 paver patio cost?
Average Cost to Install Brick Paver Patio by Size
| Dimensions | Total Square Feet | Cost Range |
|---|---|---|
| 10×10 | 100 | $800 – $2,500 |
| 12×12 | 144 | $1,150 – $3,600 |
| 12×16 | 192 | $1,550 – $4,800 |
| 16×16 | 256* | $2,050 – $6,400 |
How much should a stone patio cost?
Installing an average 300 square foot natural stone patio costs $3,900 to $15,000 for both the materials and labor. You’ll pay anywhere from $15 to $50 per square foot depending on the stone you choose. Labor alone runs $8 to $15 per square foot with materials covering a wide range of $6 to $35 per square foot.