Helpful tips

How do you fix a stuck computer on a loading screen?

Joe Ford

How do you fix a stuck computer on a loading screen?

If your Laptop stuck at loading screen (circles spin but no logo), follow steps below to fix. Shut down your laptop > boot into system recovery (press f11 repeatedly as soon as you press the power button) > then, select “Troubleshoot”> “Advanced options”> “System Restore”. Then, follow on-screen instructions to finish.

How do I fix a stuck Windows 7 logo?

Fix #3: Boot into Safe Mode

  1. Restart your computer.
  2. Press the F8 key as soon as your computer starts. You need to press the key before the Windows Vista or Windows 7 logo appears.
  3. At the Advanced Boot Options menu, select Safe Mode. The Advanced Boot Options screen in Windows Vista.
  4. Press Enter.

Why does my Windows 7 computer keep freezing?

You may see Windows freezing periodically if there is an issue with an important driver on your system. Display drivers, Bluetooth drivers, network drivers, and motherboard drivers can all contribute to temporary freezing of the system. Install all recommended Windows Updates.

Why is my Windows 7 laptop stuck on the welcome screen?

Restart Windows Update service. If you encounter Windows 7 stuck on Welcome screen after update, you can try to restart Windows Update service. Press Win + R to bring out Run dialogue. Type cmd in the Run dialogue and press Enter.

How do I fix my windows 7 from freezing?

Troubleshoot Windows 7/8/10 Random Freezes

  1. Check Event Log.
  2. Memory, Memory and Memory.
  3. Disable USB, Network and Other Devices.
  4. Update Drivers & BIOS & Windows Updates.
  5. Install Microsoft Hotfixes.
  6. Uninstall Third-Party Software.
  7. Repair Windows.
  8. Perform a Clean Boot.

How do I fix please wait on Windows 7?

Go to the Admin Tools “Services” section. Locate the following services and disable them: Windows Error Reporting, Network Location Service, Network List service. Power down the PC gracefully (Start, Shutdown, etc.) Restart the PC, wait a minute or two (no more)

How do you fix a computer that didn’t start properly?

5 Ways to Solve – Your PC Did Not Start Correctly

  1. Insert the Windows bootable drive to your PC and boot from it.
  2. Select your language preferences, and click on Next.
  3. Click on Repair your computer.
  4. Select Troubleshoot.
  5. Select Advanced options.
  6. Select Startup Settings.
  7. Click on Restart.
  8. Press the F4 key to boot Windows into Safe Mode.

How do I go into BIOS setup?

More specifically, it depends on the motherboard the BIOS is located on. Common keys to enter the BIOS are F1, F2, F10, Delete, Esc, as well as key combinations like Ctrl + Alt + Esc or Ctrl + Alt + Delete, although those are more common on older machines.

How do I enter BIOS on Windows 7 HP?

Access the BIOS Setup utility using a series of key presses during the boot process. Turn off the computer and wait five seconds. Turn on the computer, and then immediately press the Esc key repeatedly until the Startup Menu opens. Press F10 to open the BIOS Setup Utility.

How do I change the date and time in Windows 7 BIOS?

Windows 7 and Vista

  1. Press Windows key + D or navigate to the Windows desktop.
  2. Click or tap the date and time in the Windows Notification Area in the bottom-right corner of the screen.
  3. Select Change date and time settings in the bottom of the window that appears (shown below).

Why does my time and date keep changing Windows 7?

Check Time Zone and Regional Settings Maybe your Windows7 has a bad UTC offset settings. Go to Control Panel to check whether the Time Zone and Regional settings are correct. Tap on Date and Time option. Manually adjust time and data by clicking Change Data and time/ Change time zone on the right.

How do I fix CMOS date and time not set?

When you boot your PC and get a CMOS Checksum Bad – Date Time Not Set error, do not panic. It simply means that the CMOS battery on your motherboard is failing or is drained. The good news is that fixing this problem is quite easy – just replace the CMOS battery.

How do I fix CMOS setup utility?

How to reset CMOS or BIOS settings

  1. In CMOS setup, look for an option to reset the CMOS values to the default setting or an option to load the fail-safe defaults.
  2. When found and selected, you are asked if you’re sure you want to load the defaults.
  3. Once the default values are set, make sure to Save and Exit.

How do I set up CMOS?

Below is a listing of key sequences to press as the computer is booting to enter the BIOS setup.

  1. Ctrl+Alt+Esc.
  2. Ctrl+Alt+Ins.
  3. Ctrl+Alt+Enter.
  4. Ctrl+Alt+S.
  5. Page Up key.
  6. Page Down key.

Why do I have to press F2 on startup?

If new hardware was recently installed in your computer, you may receive the prompt “Press F1 or F2 to enter setup”. If you receive this message, the BIOS needs you to verify the configuration of your new hardware. Enter the CMOS setup, verify or change your hardware settings, save your configuration, and exit.