Helpful tips 

Can you run power through speaker wire?

Joe Ford

Can you run power through speaker wire?

You can use speaker wire for electrical uses, but you must pay attention. In the earliest days of home audio, speakers were often connected with simple electrical wires, or “lamp cord.” This substitution works in the opposite direction as well, and you can use speaker wire as electrical wire in many cases.

How do I install ceiling speakers without attic?

For installing ceiling speakers into a conventional ceiling with no attic, all you would need to do is cut a hole in the ceiling and fasten the speakers within it. Then, considering your speaker type (active or passive), run the correct cables accordingly.

How far apart should Atmos ceiling speakers be?

All speakers at this level, however, should be at the exact same height. In most standard Dolby Atmos setups, listener level is set at 3.9 feet, or 1.2 meters. For some users, space constraints prevent the rear and front speakers from being placed at the same height.

Should I put insulation behind in wall speakers?

Consider installing some insulation (R-13) in the wall cavity behind the speakers to improve sound quality. The width of the insulation is usually pre-cut, so you only need to cut it to length and insert it in the opening behind the speakers….

Are in-wall speakers worth it?

In-wall, speakers are usually inexpensive but this does not mean that they cannot produce good quality sound with bass. They sound awesome and if you choose the right speakers that match your room requirements then you will definitely enjoy the sound. Most of the people don’t use in-wall speakers for home theater….

Do soundbars have audio out?

For starters, soundbars rarely support audio output, they’re mostly input devices, which means you can’t directly connect other speakers to soundbars. Having said that, if you’re experienced with electronics, it may be possible to rewire and configure the internal circuitry of your soundbar to create an output signal….

Can you add more speakers to a Sony Soundbar?

Connect the sound bar, the speakers, and the wireless device to the same router. Position the two portable speakers as rear speakers of your surround sound setup. Tap Soundbar from the list. Tap Group with other speakers….

How do you hook up a soundbar to an older TV?

4 ways to connect your soundbar to your TV

  1. HDMI. An HDMI cable is by far the best way to hook your soundbar up to your TV.
  2. Digital optical or digital coaxial.
  3. 3.5mm line out or RCA.
  4. Headphone jack.

How do I get my soundbar to work with my TV?

  1. Connect one end of the HDMI cable (sold separately) to the HDMI IN port on your TV.
  2. Connect the other end to the TV OUT (ARC) port on your sound bar.
  3. Then, connect an optical audio cable from the TV’s Optical digital audio out to OPTICAL IN on your sound bar (this is necessary to hear the TV audio).

Can you hook up a soundbar to any TV?

If your TV and sound bar both have an HDMI jack marked ARC (for audio return channel), a single HDMI cable (version 1.4 or higher) is all you’ll need. If your TV doesn’t have an HDMI/ARC input, you’ll need both optical and HDMI connections between the TV and the sound bar. You may have to activate ARC on your TV.