Popular 

What is EATX power connector?

Joe Ford

What is EATX power connector?

EATX 24-pin power connector is the same as ATX 20 + 4-pin. The reason there is 20 + 4-pin is that the ATX-standard is old. The first revision was only 20 pin, then in the next revision + 4-pins so the same PSU works with both the previous generation of motherboards as the new generation.

Do I connect both eatx12v and Eatxpwr?

eatxpwr = 24 pin is essentially your Mobo power and eatx12v = 8 pin is essentially your CPU power. Some board have 2x 8 pin (2x eatx12v) and with this your CPU can draw more juice. But 1x 8pin must always be plug in (some high-end board require both 8pin ). So just plug both and ejoy your build.

Do I need both ATX Powerconnectors?

You need to connect both 24pin and 8pin. 24 pin is main power for motherboard. 8 pin is power for CPU. About GPU, yes you put your GPU into PCI-E slot and plug 2x 6+2 connectors to card and psu.

Can I use a 4-pin in a 8 pin motherboard?

The answer is yes. A 4-pin can be put, by itself, into an 8-pin CPU power socket and the machine boot up and run. It will give it what power it can, and if the CPU draws more than that, it will shut the system down.

Can you plug a 6-pin into a 4 pin?

No, the 6-pin connector is only for PCIe device and would fry your CPU/mobo. You PSU has a 4-pin connector (all ATX PSUs in the last 8+ years do). It might be a 4+4 pin plug… the plug can split in two. Otherwise, plug the 8-pin EPS into the 4-pin ATX12V plug… it will fit.

Can you use a 20 pin on a 24 pin motherboard?

Technically, a 20-pin ATX connector can be plugged straight into a 24-pin motherboard socket, leaving male pins 11, 12, 23, and 24 unconnected. The four pins that you are leaving open are just redundant lines for higher current capability (see this guide to ATX connectors and pinouts).

What is the difference between 20 and 24 pin power supply?

When you plug a 20 pin cable into a 24 pin connector you’re not providing the extra current carrying capacity which may be needed by the motherboard. If you have an ATX power supply with a 24 pin main cable, it’s okay to plug it into a motherboard with a 20 pin connector.

Do all motherboards have 24 pin connectors?

Almost all of the new power supplies used today feature a 24-pin power connector to connect to a computer motherboard. However, some motherboards still feature a 20-pin ATX power connection. Thankfully, almost all 24-pin power connectors are designed so that four of the pins can be detached or moved out of the way.

What does the 24 pin connector do?

The 20/24 pin ATX provides primary power to the system. It powers all directly connected components and SMDs, and provides power to PCI-E devices.

Are all 8-pin connectors the same?

They are completely different. The EPS connector is meant to supply power to a motherboard cpu socket while the PCI express connector is meant to supply power to a GPU. Connectors themselves however are not typically colour coded in any way.

Can I use a 6 pin PCIe into an 8 pin?

The Cable Matters 6-Pin PCI to 8-pin Adapter Power Cable provides a convenient solution for powering a video graphics card from a PSU with only a 6-PIn PCIe power connection. Power a new video graphics card with an existing 6-pin PCIe power connection on your PSU.

Is Molex to 8 pin safe?

Reputable. Yes, using an adapter is safe. From personal experience I didn’t have the correct PCI-E cable so I had to get an 8-pin adapter to power up my MSI GTX 970. Works fine.

Is it safe to use 2 Molex to 6 pin?

I would use a dual molex to 6 pin adapter at the very least, not a single molex to 6 pin adapter. Using a single molex to 6 pin is likely to cause issues ranging from the card throttling due to not receiving enough power, to cable or PSU damage due to too much current being forced through the molex cable.

What is a 8 pin cable?

Lightning is an 8-pin connector that carries a digital signal. Unlike the Apple 30 pin connector it replaces (and USB Type A or B connectors), the Lightning connector can be inserted either face up or face down. Each pin on the reverse side of the connector is connected to its directly opposite twin on the other side.

How much power does 8 pin PCIe have?

150 watts

What is 8 pin PCIe?

This connector is used to provide extra 12 volt power to PCI Express expansion cards. This is an 8 pin version introduced with the PCI Express 2.0 specification released in January 2007. These high-power cards draw most of their power from the 12 volt rail so this cable provides only 12 volts.

How much power does a PCIe riser use?

PCIe uses 12V and 3.3V, not 5V. Regardless of which type of power connector the riser has, it must generate the 3.3V power needs of the PCIe card connector using a voltage regulator or DC-DC converter.

How much power does a riser use?

How is the power draw from the riser related to the power supplied by the 6/8 pin connectors for the card? From memory an 8 pin cable can supply 150W, and a 6 pin can supply 75W. If a card is drawing 5.5 amps from the riser, that is ~66W.

How many watts does a riser use?

75 watts

Where can I mine Bitcoin for free?

Download Free Bitcoin Mining Software

  • EasyMiner: It is a GUI based free Bitcoin miner for Windows, Linux, and Android.
  • BTCMiner: BTCMiner is an open-sourced Bitcoin miner containing a USB interface for communicating.
  • MinePeon: It is also an open-sourced Bitcoin miner with prominent stability and performance.

How many ethereum can you mine in a day?

0.Ethereum