What is a slimline form factor?
What is a slimline form factor?
Slimline Form Factor is a bygone way of saying Small Form Factor, when the NLX motherboard format was still popular. The original classification required a case that only supported motherboards smaller than M-ATX, but this classification requirement is generally ignored now.
When might you want to use a slimline form factor?
Question: When might you want to use a slimline form factor? Answer: When you have very little desk space, or need to tuck the computer into atight corner or cabinet.
What is the smallest motherboard form factor?
Pico-ITX
What is meant by form factor?
Form factor is used to describe the physical size and shape of a computer device measured by outside dimensions. It is most often used to describe the size of circuit boards, especially the motherboard and expansion cards.
What is the formula for form factor KF )?
kf = dT / (m x i).. if your using the value of 1 for i for NaCl instead of 2, then Kf will be 2x’s too large.
What is the ratio of form factor?
In electronics or electrical the form factor of an alternating current waveform (signal) is the ratio of the RMS (root mean square) value to the average value (mathematical mean of absolute values of all points on the waveform).
How do you find peak factor?
Definition: Peak Factor is defined as the ratio of maximum value to the R.M.S value of an alternating quantity. The alternating quantities can be voltage or current. The maximum value is the peak value or the crest value or the amplitude of the voltage or current.
Why is crest factor important?
The crest factor for a sinusoidal current waveform is 1.414 since the peak value of a true sinusoid is 1.414 times the rms value. They draw a high current for a short period of time, and their crest factors, therefore, can be quite a bit higher than 1.414. …
How do you calculate RMS and average?
The RMS value is the square root of the mean (average) value of the squared function of the instantaneous values. Since an AC voltage rises and falls with time, it takes more AC voltage to produce a given RMS voltage than it would for DC. For example, it would take 169 volts peak AC to achieve 120 volts RMS (.
What is the use of form factor?
Form factor for computers refers to the size, shape, and physical specifications of hardware or hardware components. Computer form factor is used to describe any physical aspect of a computer system. Form factor is very important for connection compatibility.
What is maximum value of power factor?
The maximum value of power factor is one. It occurs in a pure resistor circuit. As in AC circuits, the power factor is the ratio of the real power that is used to do work and the apparent power that is supplied to the circuit. So, power factor lies within a range from 0 to 1.
How is rms value calculated?
Square each value, add up the squares (which are all positive) and divide by the number of samples to find the average square or mean square. Then take the square root of that. This is the root mean square (rms) average value.
What is M in root mean square velocity?
The root mean square velocity or vrms is the square root of the average square velocity and is. vrms=√3RTM. Where M is equal to the molar mass of the molecule in kg/mol.
Is 240V RMS?
With a pure sinusoidal waveform the voltage that is generally discussed is the RMS voltage because this is equivalent to the DC voltage that produces the same heating effect for a given current. So 240V RMS is equivalent to 339 V peak, or 679 V peak to peak and can be written as 240 Vrms.