What does a p28 ECU do?

What does a p28 ECU do?

a p28 is a Honda obd1 ECU, then it is “chipped” by a company or tuner, allowing you to tune and add features to your honda ecu.

What Honda ECU can be chipped?

AS LONG AS THE ECU HAS p08, p28, or p06 somewhere on the side it can be chipped. Once you chip it you can THEN turn that ecu to ANY ECU. YOU DO NOT have to do an engine swap. Go look at your ecu for p06, p08, or p28 on the sticker.

Can you tune a stock Honda ECU?

OBD1 can be chipped, so no need for a stand alone. And even a 100% stock car can benefit from a tune. Each motor runs slightly differently, especially with some wear and tear on it, but each stock ECU runs the same tune. Dialing in the ECU for the exact engine will result in better power, mileage, and reliability.

Can you chip a P2P ECU?

Re: CHIPPED P2P ECU? Yes, they can be chipped!

Can a obd2 ECU be chipped?

You absolutely can chip OBDII. 97+ H22 ECUs must be chipped to get rid of the immobilizer.

Is a B20B a VTEC engine?

Only the SI, GSR, and ITR engines have the VTEC. All other B series engine don’t have it. So the RS,LS, GS, SE integra (which has the B18b) and the CRV (which is the B20) don’t VTEC.

How much HP is b20 VTEC?

horsepower, about 180ish.

What is the best B16 engine?

B16B

Is a B18C1 VTEC?

B18C1 was an engine for USDM Acura Integra GSR. This was an analog to JDM B18C, but the compression ratio was reduced to 10. The VTEC system was triggered @ 4,400 rpm, intake manifold was triggered @ 5,800 rpm. The power was 170 HP @ 7,600 rpm; torque was 174 Nm @ 6,200 rpm.

How much HP can a B16 handle?

250 – 400 whp.

Is a b18a1 a good motor?

the b18a1 is a good reliable motor.

Can you turbo a stock b16?

Re: turbo on stock b16 (Phatwhippin_CRX) Yes..

How much power can a K20 handle?

about 318-326hp

Is a K24 faster than a K20?

The k24 is 2.4 liters and off the bat has way more torque than a k20. K24s come in Honda elements, Accords, Crvs and there is a 200hp one in the TSX. TSX will cost you 1500 bucks though. Even so these engines are cheaper, have more torque and respond to mods better.

Whats better K20 or K24?

For most street applications, the K20 provides more than enough power to push a lightweight Honda around. For those who want more low-end torque and more over-all power, the K24 is the better choice if you’re willing to pay for it.