Technology 

What corrective action would a technician take in response to a print spooler error?

Joe Ford

What corrective action would a technician take in response to a print spooler error?

What corrective action would a technician take in response to a print spooler error? Explanation: Print spooler errors can occur when the printer service is stopped or not working properly. The first corrective action is to restart the print spooler.

How do you fix a printer problem?

Troubleshooting offline printer problems

  1. Check to make sure the printer is turned on and connected to the same Wi-Fi network as your device.
  2. Run a printer power cycle.
  3. Set your printer as the default printer.
  4. Clear the print queue.
  5. Reset the service that manages the printing queue.
  6. Remove and re-add your printer to your device.
  7. Restart your PC.

What are the possible causes of the printer is not responding?

This problem typically occurs when there is an error between your device and printer. But sometimes, it can be a simple case of improper cable connection or paper-jam. A printer offline issue can also mean an internal setup issue with your printer or computer.

What do I do when my HP printer says not connected?

Fix 1: Check the printer connection

  1. Restart your printer. Power off and then power on your printer to restart it.
  2. Check the connection issue. If your printer is connected by the USB cable, ensure the cable is not damaged, and it connects firmly and correctly.
  3. Check the network connection.

What does it mean when my printer is in error state?

The ‘HP printer is in an error state’ issue can also arise due to faulty or incompatible printer driver. However this can be fixed easily by updating or reinstalling the drivers.

How do I force a print job to cancel?

Delete the Job From the Computer Click the Windows “Start” button and click “Control Panel.” Click “Hardware and Sound” and click “Printers.” Find your printer on the list of those installed and double-click it. Right-click the job from the print queue and select “Cancel.”

How do I cancel a print job stuck in the queue?

Go to your Start button and type services. msc in the box and hit Enter: Scroll down to Print Spooler, right click and then click Stop. Browse to C:\Windows\System32\Spool\PRINTERS and delete the job(s) you need to kill.

How do I clear my printer queue in Windows 10?

can’t delete print queue in Windows 10

  1. Open the Services window (Windows key + R, type services.
  2. Select Print Spooler and click the Stop icon, if it is not stopped already.
  3. Navigate to C:\Windows\system32\spool\PRINTERS and open this file.
  4. Delete all contents inside the folder.
  5. Return to the Services window, select Print Spooler, and click Start.

How do I clear the print queue in Windows 10?

How to clear printer queue in windows 10

  1. Press Windows key + R, type services.
  2. Scroll down to the Print Spooler service and right-click on it and select Stop.
  3. Next you need to go to the following directory: C:\WINDOWS\System32\spool\PRINTERS.
  4. Now you can go back to the Services console and right-click and select Start for the Print Spooler service.

How do I clear the print queue in Word?

To delete jobs from printer queue go into Start Menu > Control Panel > Printers (or Devices and Printers) > find the printer with the problem in the displayed list, double click on it > It should display the list of jobs printing. You should see one with “Error” in the Status column.

How do I clear the print queue in CMD?

Windows: Clear Print Queue

  1. Select Start.
  2. Type Command .
  3. Right-click “Command Prompt” and select “Run as administrator“.
  4. Type net stop spooler then press “Enter“.
  5. Type del %systemroot%\System32\spool\printers\* /Q then press “Enter“.
  6. Type net start spooler then press “Enter“.
  7. The print queue on your Windows should now be cleared.

Why does my computer say my printer is out of paper when it’s not?

The paper might not be engaged with the feed rollers. The paper-width guide is pressed against the paper stack too tightly. The paper tray is not completely inserted into the product. The paper settings in the print driver do not match the paper loaded in the paper tray.

Popular 

What corrective action would a technician take in response to a print spooler error?

Joe Ford

What corrective action would a technician take in response to a print spooler error?

What corrective action would a technician take in response to a print spooler error? Explanation: Print spooler errors can occur when the printer service is stopped or not working properly. The first corrective action is to restart the print spooler.

What are two probable causes for printer paper jams choose two?

What are two probable causes for printer paper jams? (Choose two.)

  • high humidity.
  • the wrong type of paper.
  • a defective print cartridge.
  • misaligned print heads.
  • an incorrect print driver. Explanation: Humidity can cause sheets of paper to stick together which could cause paper jams.

What is the first action that should be taken when performing preventive maintenance on a printer?

What is the first action that should be taken when performing preventive maintenance on a printer? – Disconnect the printer from the power source.

Which cloud computing service would be best for an organization that does not have the technical knowledge to host and maintain applications at their local site?

Software as a Service (SaaS)

What is a proactive way to keep a laptop clean?

What is a proactive way to keep a laptop clean?

  1. Use compressed air to blow the dust off the optical drive.
  2. Use mild soap to clean the screen.
  3. Keep fluids away from the laptop computer.
  4. Clean the keyboard using cotton swabs. Explanation:

What is the first step in the process of troubleshooting a laptop?

What is the first step in the process of troubleshooting a laptop? Establish probable causes. Determine the exact cause.

What are the 7 troubleshooting steps?

Seven-step troubleshooting methodology. The steps are: identify the problem, establish a theory of probable cause, test the theory, establish a plan (including any effects of the plan), implement the plan, verify full system functionality, and—as a final step—document everything.

What are the six steps of troubleshooting process?

CompTIA A+ | Microsoft MTA O/S: 6-Step Troubleshooting Process

  1. Identify the problem.
  2. Establish a theory of probably cause. (
  3. Test the theory to determine cause.
  4. Establish a plan of action to resolve the problem and implement the solution.
  5. Verify full system functionality and if applicable implement preventative measures.
  6. Document findings, actions, and outcomes.

What are the 5 basic troubleshooting steps for a computer?

5 easy fixes for common computer problems

  1. Run a thorough virus scan.
  2. Update your software.
  3. Cut down on the bloat.
  4. Test your Wi-Fi connection.
  5. Reinstall the operating system.

How do I check my computer for problems?

To launch the tool, press Windows + R to open the Run window, then type mdsched.exe and hit Enter. Windows will prompt you to restart your computer. The test will take a few minutes to complete. When it’s over, your machine will once again restart.

What are basic troubleshooting techniques?

Basic troubleshooting techniques

  1. Write down your steps. Once you start troubleshooting, you may want to write down each step you take.
  2. Take notes about error messages. If your computer gives you an error message, be sure to write down as much information as possible.
  3. Always check the cables.
  4. Restart the computer.

What are the basic steps in troubleshooting a computer?

The six steps of troubleshooting.

  1. Identify the problem.
  2. Establish a theory of probable cause.
  3. Test probable cause theory to determine actual cause.
  4. Establish an action plan and execute the plan.
  5. Verify full system functionality.
  6. Document the process.

What are the different types of troubleshooting?

The sections that follow describe each of these methods in more detail.

  • The Top-Down Troubleshooting Approach.
  • The Bottom-Up Troubleshooting Approach.
  • The Divide-and-Conquer Troubleshooting Approach.
  • The Follow-the-Path Troubleshooting Approach.
  • The Swap-Components Troubleshooting Approach.

What should a technician do before beginning any troubleshooting steps on a customer computer?

What should a technician do before beginning any troubleshooting steps on a customer computer?

  1. Perform a data backup.
  2. Document the findings.
  3. Identify the problem.
  4. Establish a plan of action. Explanation:

How do I troubleshoot my graphics card?

How to troubleshoot video card problems

  1. Fix #1: install the latest motherboard chipset drivers.
  2. Fix #2: uninstall your old display drivers and then install the latest display drivers.
  3. Fix #3: disable your sound system.
  4. Fix #4: slow down your AGP port.
  5. Fix #5: rig a desk fan to blow into your computer.
  6. Fix #6: underclock your video card.
  7. Fix #7: do physical checks.

How do I run a diagnostic on my graphics card?

Running the DirectX Diagnostic Tool (Dxdiag.exe)

  1. Click on the Windows “Start” button and either choose “Run” or click into the “Start Search” field depending on which shows up on your menu.
  2. Type dxdiag in the text field.
  3. Click OK.

How do I test if my graphics card is working?

If you want to see if it functioning, assemble the build outside the case and do a test bench run. Plug in the display to the GPU. If you see a picture, chances are it’s working. Also you can see the lights/fans turning visually.

How do I test if my graphics card is failing?

Ultimately, the best way to determine whether a component is faulty is to swap it out. For example, if you think your graphics card may be causing your computer to blue screen, pull the graphics card out of your computer and swap in a new graphics card.

How can I fix my graphics card without display?

To repair graphics card ‘no display’ problem, disable/enable card driver….Now, enable the graphics card again by visiting the Device Manager on your PC or laptop and following these steps:

  1. Click Display Adapters.
  2. Double click on your graphic card.
  3. Click on properties.
  4. Go to the Driver tab and click the Enable button.

Can you fix a dead GPU?

Firstly put your Dead Graphics Card on stove (You must be assure very light fire and enough Heat). Put it for 2 mins each side (Be careful Don’t burn/melt anything). Then let it be cool for 12-15 mins. Hopefully for you may it work well.

How do I fix GPU Artifacting?

Illustrious. most artifacting issues are Graphics card based issues, most of the time, it’ll never and can’t be fixed, you may have to get a new graphics card. Generally, re-installing the GPU drivers and lowering clock rates doesn’t fix it, there is no other way.

How do you tell if your graphics card is fried?

Warning Signs

  1. Stuttering: When a graphics card starts going bad, you might see visual stuttering/freezing on the screen.
  2. Screen glitches: If you’re playing a game or watching a movie and suddenly start seeing tearing or weird colors appearing all over the screen, your graphics card might be dying.

Why is my graphics card not working?

There can be a lot of reasons for this problem. The problem might be because of the faulty drivers or incorrect BIOS settings or hardware issues or GPU slot issues. The problem can also be caused by a faulty graphics card as well. Another reason for this problem can be the power supply issue.

Do graphics cards wear out?

As you might be able to guess, your graphics card itself doesn’t generally degrade over time. Some pieces of hardware like hard drives or SSDs can become less effective over time. While your graphics card doesn’t degrade over time, that doesn’t mean it can’t wear out.

What is the lifespan of a graphics card?

5 to 10 years

How many years does a graphics card last?

5 years

Is it worth buying a used graphics card?

The main purpose of buying a used graphics card is to score a bargain or at the very least, get your hands on a card that costs at less than a brand new one. If the price is closer to the MSRP, then buying a used graphics card generally isn’t worth the risk, since the savings will end up being quite minimal.

Can I put 2 different GPU in my PC?

Yep, having two completely different GPUs in one PC is possible, as long as there are enough PCI slots. However, if you are planning to use SLI, it requires two of the same cards. Furthermore, you should remember not all applications take advantage of the dual GPU setup.

Does mining wear out GPU?

Since mining keeps GPUs running for longer periods of time, the fans will wear out much faster. When managed properly, prolonged activity doesn’t negatively impact your GPU’s integrity.

What causes GPU Artifacting?

Visual artifacts can be caused by an overheating graphics card. Check your graphics card temperature with a tool like GPU-Z. If the GPU is overheating, make sure the GPU fan is hooked up to its power connector. Damaged GPU RAM can cause artifacts.