Popular 

What cars had the 289 engine?

Joe Ford

What cars had the 289 engine?

The 289-4V was also the engine for the first Australian Ford Falcon GT, the XR Falcon GT.

How much horsepower can a 289 handle?

400 hp

How do you tell if you have a 289 or 302?

For a very few early 289 blocks, look for a 5-bolt bellhousing. It could be a 260 or 289, but if its a 5-bolt, it can’t be a 302. If it has a dipstick opening on the side of the block, it is a late model 302, all 289 had the dip stick in the timing cover.

Will a 302 intake fit a 289?

302 and 289 intakes are interchangeable.

What years did Ford make the 289?

289 engine specifications were unchanged for 1966 and 1967. In 1968, the four-barrel 225 hp engine was dropped, leaving only the two-barrel which was reduced back to 195 hp. 1968 was the last year of production for the 289 in the U.S. The 289 was also used in the first Australian Ford Falcon GT, the XR Falcon GT.

Is the 351W a good engine?

the 351w is a very good engine, it can handle a lot of power before the block splits, that usually happens at around 800hp. the 351m is an ok engine, good for use in trucks and for the basis of building a good 400.

How much HP can a 351C block handle?

Registered. The hp on any block depends on many factors. The most obvious of course is how the block is casted which the 351C has an advantage in that area over any other ford small block. One block could crack at 500 hp while the other holds fine at 700+.

How much power can a 351 Cleveland make?

The 351C is a racing bred engine. Throw some cash at it and it will scream. The stock crank will withstand turning at 8k and aftermarket forged cranks can do 10k plus.

What Fords came with a 460?

460

  • Ford Thunderbird (1972-1976)
  • Mercury Cougar (1974-1976)
  • Ford/Mercury full-size (1972-1978)
  • Ford/Mercury intermediate (1973-1976)
  • Ford F-Series (1973-1998)
  • Ford E-Series (1975-1996)

What is the best 460 block?

Best Stock 460 Block ?? The D0VE-A or the D1VE-AA are the better ones to get. The D0VE-A and the D1VE-AA blocks were used as standard blocks in 429’s and 460’s in Lincolns and T-Bird’s from 70-71 and also were used as the 2 bolt Cobra Jet Block.

Is the 460 a good engine?

It is a truck engine and you will find it up to any task you wish to do with it. It is a solid workhorse that you can have fun with if you like tons of power. I think it’s the best light truck engine ever devised.