How do you enlarge an existing hole?
How do you enlarge an existing hole?
To enlarge an existing hole:
- Cut two scraps of 1/2″ or thicker plywood, making them several inches larger than the hole.
- Mark the centerline of the existing hole on the edge of the door.
- Clamp the scraps of plywood above and below the hole.
- Extend the centerline of the hole across the top scrap of plywood.
How do you enlarge an existing hole in metal?
Enlarging holes or aligning mismatched holes in metal is the job of a tool known as a reamer. The process by which this is done is called Reaming and differs from traditional drilling as it requires an existing hole, or holes, as a starting point.
How do you slightly enlarge a hole in wood?
7 Answers. You might use a half-round rasp or file. The general method I use to make a bigger hole is to take a scrap piece of plywood (1/4″ works great) or pegboard or similar that is a bit bigger than the hole, clamp/screw/hold it in place, then use the correct size hole saw to drill through that and into the board.
How do you make a hole bigger without a drill?
To make a hole bigger without a drill, you need to get either sandpaper and a dowel, a hand file, or a jab saw. It’s helpful to draw the size of the circle needed first, then manually file the excess wood until the hole is the right size. Wipe away the dust and your project is ready to continue.
How do you enlarge a hole in a granite countertop?
Use your router and a carbide pattern bit to enlarge the hole following the pattern with the router and bit. If you go with the RIDGID diamond bit in your drill, you can still use the template secured to the countertop with double stick tape. Make the hole in the template the same size as the OD of the bit.
How do you enlarge a kitchen sink hole?
Enlarge the hole if necessary. Remove the sink and apply a bead of mildew resistant tub-and-tile caulk just to the inside of the pencil line. Set the sink back in the hole and use a nut driver to tighten the clips that hold the sink down. Tighten the clips just enough to close the gap between the sink and countertop.
How much does it cost to drill a hole in granite?
I called our granite installer and they want $200+ just to come drill the holes. Looking online, you can get Diamond Core Hole Saw Bits for $40, and smaller diamond bits for the screws for around $10.
What is the best drill bit for stone?
Booster-Max and Booster-Spline. European company Diager has been making drill bits for more than half a century and now manufactures over 35 million bits a year. Their top-rated drill bits for stone and hard stone are the Booster-max and Booster-spline. They are made of chrome vanadium steel with copper-brazed tips.
Can you drill a hole in granite?
Drilling the Holes A diamond drill bit for granite, a diamond hole saw, and a diamond saw blade are requisite tools for cutting the slab. Using diamond-plated blades and bits will give a very clean and precise cut.
Can you use a hammer drill on granite?
You should be using a masonry bit, which is designed for drilling into concrete, masonry, and stone. It has a different tip than a regular wood/metal bit. I have been drilling 1″ diameter holes to a depth of 6″ in solid granite. Also you do not use a hammer drill.
How hard is it to cut granite countertops?
Cutting granite countertops is not as hard as it may seem. The process of cutting granite will only take you a few short hours between setting up and completing the job. This relatively easy job can save you some money when installing granite in your home. You must be logged in before you can vote.
How much does it cost to cut a granite countertop?
How Much Does It Cost to Cut Granite? On average, it is $300 to $500 to cut the stone and polish the edge. Your rate will depend on your area, how soft or hard the stone is and the type of edge you want.
How do you cut a granite countertop with a grinder?
- Evaluate your grinder.
- Purchase a specialty cutting blade.
- Choose an outdoor spot to cut the granite, if possible.
- Mark the granite for cutting.
- Turn on the grinder and begin making small, shallow cuts.
- Stop periodically to cool the cutting blade.
How do you break in granite countertops?
Drag a knife under the sink’s rim, for sinks sitting on the granite. It helps break the caulk and glue. To crack the seal, push the knife between the granite bottom and the sink’s top. Gently press a rubber mallet on the bottom of the sink to lift it away.
What can break granite?
What Can Cause Granite Countertops to Crack?
- Natural Fissures. Like we said, sometimes cracks in granite can be natural.
- Hard Hit. While granite is durable, a hard hit with a heavy object can cause a crack.
- Weight. Just like a hard hit, placing a lot of weight on the countertop could also lead to a crack.
- Improper Shimming.
- Hot Pots.
How do you move a granite countertop without breaking it?
Transporting Granite It’s important to always carry the countertops in a vertical position, never horizontally flat, to avoid cracking or breaking the stone. To transport granite slabs, carry them on edge in an A-frame rack, the way glass is carried. If needed, you can make a simple rack from 2x4s.
Does granite crack easily?
Granite is extremely unlikely to crack during normal use. Most cracks are the result of stress during handling, fabrication, or installation. However, it is possible to cause cracks or stress fractures by standing on countertops or, in some cases, placing extremely hot objects on the surface.
How heavy is a granite countertop?
The weight of granite depends on its density. The average 3/4″ thick granite weighs 13 pounds per square foot, 1 1/4″ thick granite weighs around 18 to 20 pounds per square foot, and 2″ thick granite weighs about 30 pounds per square foot. The darker stones are usually heavier than the lighter stones.
Can you remove kitchen cabinets without removing countertop?
The best way to learn how to remove kitchen or bathroom vanity base cabinets without uninstalling the countertop is to just do it. You really can leave the counter in place and only take out the base cupboards, but you are going to need some two-by-four studs to use as supports.
Can countertops be saved when replacing cabinets?
Yes! Refacing the cabinets — whether it’s under your existing countertops or throughout your entire kitchen — can create a whole new look, just like a full cabinet replacement renovation. You can also apply this kitchen refacing process under solid surface counters, such as Corian.
Can I replace countertops without replacing cabinets?
Technically yes, you can put fresh counters on your existing cabinets. However, it depends on a lot of different factors and it’s not always the best option. If you’re looking for a cheap kitchen remodel, a new countertop on your existing cabinets is a great way to make a large aesthetic difference.
How do you remove kitchen cabinets without damage?
Modern Grip
- Taking down the kitchen cabinets?
- Remove the cabinet doors and drawers.
- Take off the cove molding along the soffit with a pry bar.
- Unscrew the cabinet unit from the soffit and remove the cabinets.
- Throw away or donate the old cabinet doors, molding and hardware.
Can I reuse my kitchen cabinets?
“Don’t reuse cabinets unless they are constructed as independent boxes,” Joe says. “Many old cabinets were literally built on site and have no backs.”
How do I get rid of old kitchen cabinets?
Cabinets that are made from untreated wood can be taken to a local recycling center or picked up by an eco-friendly junk removal service like LoadUp or taken to your local recycling facility.