How do I find out what year my Homelite chainsaw is?
How do I find out what year my Homelite chainsaw is?
If you’d like to identify the year an old, blue Homelite chainsaw was made, knowing its serial number and model number is necessary.
- Turn the blue Homelite chainsaw upside down, and locate its metal identification tag.
- Call Homelite’s toll-free customer service line at
How many cc’s is a Homelite Super XL?
58.2 cc
What size chain does a Homelite XL use?
20″
Does number of drive links matter?
Number of individual drive links must be counted. No exceptions. Simple length measurements (like “a 2 foot chain) are not helpful for correctly matching chains. Chain length is determined by a combination of distance between links (pitch) and the number of links.
What is a .325 chain?
“Pitch” – The distance in inches between any three consecutive rivets on the chain, divided by two. The most common are 3/8″ and . 325″.
How do I know what pitch my chain is?
To determine the pitch (chain size), you’ll need to measure the distance between any three consecutive rivets, then divide the result by 2. The rivets are the small, round pegs/studs that hold the chain segments together. Measure from the first to the third, then divide that number in half to get your chain pitch.
What size is 40 chain?
Chain standards
| Size | Pitch | Maximum Roller Diameter |
|---|---|---|
| 25 | 0.250 in (6.35 mm) | 0.130 in (3.30 mm) |
| 35 | 0.375 in (9.53 mm) | 0 |
Is 40 and 420 chain the same?
#420 will have more strength than the #41 chain because the side plates will be taller. #40 will be the beefiest chain in this class. This will help with thicker sprockets since there is more room between the side plates. #41 will look just like the #420 chain, but will stand shorter.
Is 40 and 41 chain the same?
#40 Chain will fit on #41 sprockets, it is basically the same as #420, except it has wider Rollers, it is considerably heavier duty than #41.
Is #50 chain the same as 520?
A #50 chain IS a 530 chain. Larger dirt bikes, dual sports and ATV’s are generally a 520 chain. Street bikes more commonly are a 530, smaller displacements may use 525.
What is the difference between 35 and 41 chain?
What is the difference between 35 and 41 chain? DIFFERENT CHAIN SIZES- explained #35 Chain will ONLY fit #35 sprockets, no questions asked. #41 Chain will only fit #41 sprockets, #40 sprockets are too wide. #420 will fit on #41 sprockets, its just a little bit heavier duty with a larger pin.
What size is a 428 chain?
Metric Dimensions
| Chain | Pitch | Roller Diameter |
|---|---|---|
| 420 | 12.70mm | 7.75mm |
| 428 | 12.70mm | 8.51mm |
| 520 | 15.88mm | 10.16mm |
| 525 | 15.88mm | 10.16mm |
How tight should go-kart chain be?
A go-kart chain should be tight so that there is about 1/4″ or 3/8″ of flex. If there is too much flex in the chain, there is a high chance that the chain may dislodge when the engine is running. Now, all you need to do is to determine the chain size for a go-kart.
What size is 41 chain?
#41 Roller Chain Dimensions
| Size | Pitch (P) | Roller Diameter (D) |
|---|---|---|
| 41-1 | 0.50″ | 0.306″ |
How do I set the size of a chain link?
Chain Link Sizes: How to Measure Chain Link Sizes
- Pitch is measured by finding the distance from the center of one pin to the center of the next pin in line.
- Determine your side plate height and thickness by measuring both inside and outside the roller chain to ensure that you’re seeing a good average size.
How is chain thickness measured?
To measure, wrap a soft tape measure around your neck, keeping the tape measure parallel to the floor as you measure. Then, add 2 to 4 inches (5 to 10 cm) to your neck measurement to calculate your minimum recommended chain length.