Why does my ceiling fan work but not the light?
Why does my ceiling fan work but not the light?
Check to see that the bulbs are screwed into their sockets. Check that the bulbs have the proper wattage for the ceiling fan light assembly. Confirm that the non-working bulb is burned out by testing it in a working lamp. Replace any burned out bulbs with new bulbs that have the correct wattage.
Why is my ceiling light not working?
First check the bulb. Tighten the bulb if it is loose, then try the switch again. If a problem remains, be sure the switch is off, remove the bulb and substitute a new one. If the light does not work with a new bulb, check whether the circuit breaker or fuse governing the fixture has tripped or blown.
Is there a reset button on a Hunter ceiling fan?
Turn the power to your fan off for 5-10 seconds and then back on using the wall switch. Press and hold both the ‘FAN’ and ‘LIGHT’ buttons for at least four seconds. This step should be done within three minutes of restoring power to the fan. Your fan should turn on low speed indicating the pairing was successful.
How do I fix my fan speed control?
- Turn off power to the fan at the circuit breaker.
- Remove the light bulbs and shades, if the fan is equipped with a light kit.
- Remove the small screws holding the switch housing cover or light kit base to the switch housing.
- Check all the wiring, using a noncontact voltage tester to ensure the power is off.
How do you know if capacitor is not working?
Bad AC Capacitor Symptoms Checklist Contact us for air conditioning repairs if you notice: No cold air blows into your home while the air conditioner runs. The air conditioning system doesn’t turn on at all. Your energy bills are higher without explanation.
How do I test a ceiling fan capacitor?
To test the capacitor, connect it it to multi meter ,putting it in resistance mode. A good capacitor will show zero resistance initially and slowly the needle moves towards infinity. If needle gets stuck at zero, it is shorted and it shows infinity from the start, it is open.
How many capacitors should a ceiling fan have?
Fans that have more than one speed will often use more than one capacitor for speed regulation. To save space quite often capacitors that contain more than one value will often be used. Three wire capacitors are a bit more Page 2 difficult as they contain two different values.
Why a capacitor is used in a ceiling fan?
Why Capacitor Is Used In a Fan The capacitor is used not only to start the fan but also to make it spin. In simple words, the capacitor creates a magnetic flux (torque) which makes the fan rotate. Generally, two capacitors in parallel series are used in the ceiling fan.