Lifehacks 

What is the hole in a door knob for?

Joe Ford

What is the hole in a door knob for?

On the inside of that hole is a groove that will fit a small flat head screwdriver. Think of it as a very small screw that turns the lock. When you insert a small enough flat head screwdriver into this groove it will open your locked door. So now you know how to open a locked interior door knob.

How do I fix a loose emtek door knob?

Steps

  1. Remove the hardware from the door.
  2. Loosen the knob or lever with an Allen Wrench.
  3. Remove the turn post.
  4. Observe the inner mechanical parts.
  5. Use a screwdriver to remove the top clip.
  6. Remove the top washer.
  7. Look for breaks in the torsion spring.
  8. Remove the torsion spring.

How do you tighten a Baldwin door knob?

Locate the knob or the thumb button on the inside of the door. Look for the two mounting screws, one on either side of the knob spindle, or thumb button. Tighten these screws with a screwdriver. Do not over-tighten.

How do you unlock a Baldwin door knob?

To UNLOCK the door from the INSIDE: Simply rotate the knob in either direction (or push down on a lever) and the bolt and the latch will retract simultaneously. REMEMBER- You must push the bottom button on the edge of the door if you wish to leave the thumb piece unlocked.

How do you fix a locked door knob?

A door knob lock button stuck has a few quick fixes that you can try out.

  1. Start by trying to push the lock button.
  2. Push and hold the button in.
  3. Release the button quickly (try sliding your finger off the button so the pressure is maintained up until the precise moment of release with no backing off).

How do you fix a door handle that doesn’t lock?

Loose Lockset

  1. Using a screwdriver, loosen the screws a little on the base of the knob.
  2. With the door open, turn the knob in a clockwise direction while holding the knob on the other side of the door firmly.
  3. Screw the screws at the base of the knob back into place tightly and try turning the knob again.

Can you oil a lock?

Spray a light all-purpose household lubricant or silicone lubricant on all moving parts of the lock, flushing out the latchbolt. Use powdered graphite to lubricate the lock cylinder.

Can I use silicone spray on bike chain?

Silicone spray is an excellent lubricant and can be used for your bike chains if you do not ride frequently. However, as silicone spray has a chance of getting washed out, it would be better for you to get a special bike chain lube if you ride frequently.