What does decoder off mean on a Yamaha receiver?
What does decoder off mean on a Yamaha receiver?
information message
How do I reset my Yamaha RX v373?
Hold “Info + Tone Control + Straight” for at least five seconds, while still holding, press the “Power” button. Manually reboot the AVR for normal operation.
How do I get my Yamaha receiver out of Protect Mode?
This protection mode disables the capability to turn on the device. To disable this hold Info + Tone Control + Straight for at least five seconds, while still holding, press the Power button. Manually reboot the AVR for normal operation.
What is Sur decode Yamaha?
In yamaha “surround decode” plays multichannel identical as “straight mode” but in case of stereo signal it’s uses Prologic or neo6 (or they versions in atmos/dtsx setup). In “straight” mode yamaha plays signal as it is. Stereo is stereo and multichannel is multichannel.
What is straight mode Yamaha?
When STRAIGHT is pressed and the straight decode mode is enabled, the unit produces stereo sound from the front speakers for 2-channel sources such as CDs, and produces unprocessed multichannel sounds for multichannel sources.
Why does my Yamaha receiver says PCM?
The PCM light on the front of the receiver lights up when the Yamaha unit is receiving a PCM signal from a source such as a DVD player. If you are watching DVD movie and the PCM light is lit, verify the digital audio out settings on the DVD player menu to make sure that both Dolby Digital and DTS are enabled.
What is surround decoder Yamaha?
The surround decoder will upmix stereo content to create audio for all 5.1 speakers. If you select straight on stereo content, then audio will just come from the front left and right speakers. If you are selecting straight and getting audio from 5.1 speakers then the source content has a 5.1 soundtrack.
How do I get my TV to play sound through my receiver?
Connect a Coaxial Digital Cable, Optical Digital Cable, or Audio cable to the Audio Output jack on your TV. Connect the other end of the cable to the corresponding jacks on the A/V receiver or home theater system. Depending on your device, the audio input may be labeled TV INPUT or VIDEO INPUT.
Is WiFi analog or digital?
So, the answer will be both. Analog part of the wifi is the electromagnetic waves used to carry the data. Meanwhile the digital part is the data transferred. You will need analog to digital converter to receive the data and vice versa, digital to analog to transmit.