How many hours on a boat engine is a lot?
How many hours on a boat engine is a lot?
The average marine gasoline engine runs for 1,500 hours before needing a major overhaul. The average marine diesel engine will run for more than three times that long and log an average 5,000 hours under the same conditions.
Are outboards better than Inboards?
Inboard/outboards are just “marinized” automobile engines stuck in a boat. Outboards provide more room in the boat because they are installed on the transom, outside the boat. … Four-stroke outboards offer much better fuel economy, less GPH, more MPG than I/O motors. Outboards offer better power to weight ratio.
What is the most powerful outboard motor?
World's Largest Outboard Motor Debuts At 627HP. Miami Beach, Feb. 12, 2015–The world's largest outboard engine, a 627-Horsepower outboard motor by Seven Marine, debuted at the 2015 Miami International Boat Show today. Below is a bullet list of features this behemoth of a motor possesses.
Who makes Suzuki outboard motors?
Suzuki outboard motors are made at the Toyokawa facility in the Aichi prefecture of Japan as well as in factories in other countries. Foreign manufacturing began with a 5 horsepower model, first produced in Thailand by the Thai Suzuki Motor Company in July of 1999.
What is the fastest outboard motor?
Evinrude V8 is the world's fastest outboard EVER- 176.556mph average.
How much does a boat engine overhaul cost?
A typical rebuilt midsize outboard motor from the 1980s to 2000 between 90 to 115 hp will cost at least $3,500 if purchased from a discount dealer; it will likely cost around $4,500 if purchased from a local full-service dealer. Rebuilding your engine will cost around $2,500.
How much HP does my boat need?
The rule of thumb is based on weight alone, and says you should have between 40 and 25 pounds of weight for each horsepower. For example, a 5,000-pound boat could have an engine with between 125 and 200 horsepower.
Did Yamaha make Mercury outboards?
The early Mercury FourStroke engines were originally manufactured jointly with Yamaha; Mercury provided the block, crankcase, crankshaft and connecting rods, while Yamaha produced the cylinder heads for the 50hp. The 9.9 was built with a Yamaha powerhead.
What is the difference between a 4 stroke and a 2 stroke engine?
A big difference between the two styles of engines is that 4-strokes have intake and exhaust valves rather than ports for pulling in fuel and air. … After the fuel ignites it will force the piston back down the cylinder. This stroke is the one that gives the engine its power, also known as the power stroke.
What is the lightest 9.9 hp outboard?
Mercury Marine is introducing a new 9.9hp TwoStroke outboard that is the lightest in its class – an ultralight, compact and portable engine which provides exceptional power.
How much do outboard motors cost?
How much do outboard motors cost? Outboard motors can range from $110 to nearly $90,000 depending on power, make, model, and other factors.
How do I choose a kicker motor?
Yamaha's F25 has gone through a redesign so transformative, it's now the lightest 25-horsepower outboard on the water—two stroke or four stroke. Its new portable design and class-leading power-to-weight mean 25 horses can boldly go where they've never gone before.
Where are Yamaha outboards made?
Yamaha outboard motors are manufactured at four production bases: the Fukuroi South Factory (Fukuroi City, Shizuoka Prefecture) and group company Yamaha Kumamoto Products Co., Ltd. (Yatsushiro City, Kumamoto Prefecture) in Japan, MBK Industrie in France and Yamaha Motor da Amazonia Ltda.
What is Mercury OptiMax?
Introduced in 1995, Mercury's OptiMax direct fuel-injection system was a lead bull in the manufacturers' stampede toward cleaner two-stroke engines. OptiMax was not designed as a fuel system to bolt onto an existing engine, but as a new power plant to complement Mercury's line of outboard engines.
What is the lightest outboard motor?
Mercury Marine is introducing a new 9.9hp TwoStroke outboard that is the lightest in its class – an ultralight, compact and portable engine which provides exceptional power.
How fast can a 175 hp boat go?
Our boats average about 165 HP, providing optimum cruising speeds of 25-40 MPH based on the specific length and horsepower combination.
Who makes Mercury outboard engines?
Mercury Marine's primary business is outboard motors. Mercury Outboards, 30 Hp and less, are made by Tohatsu in Japan. Mercury Marine builds 40, 50 and 60 horsepower outboard motors in Suzhou, China. Mercury also manufactures engines over 75 horsepower at its facility in Fond du Lac in Wisconsin.
Who makes Force outboard motors?
The Force name appeared when U.S. Marine, makers of Bayliner boats, purchased the Chrysler outboard plant in 1984. Chrysler continued to make engines under the Chrysler marque, however. U.S. Marine owned the Force brand until 1988, when Mercury Marine acquired it. Mercury Marine dropped Force Outboard in 1996.
Are Evinrude outboards reliable?
Evinrude vs Yamaha. Both of these popular outboard brands are tough to beat. On one hand, the Evinrude has lower maintenance and will exude lower environmentally hazardous emissions. Yamahas, in comparison, are known as the most reliable motors that have been around for 30+ years.
Is Evinrude ETEC 4 stroke?
The technology is considered 2-Stroke, Direct Injection. Evinrude E-TEC in fact, has cleaner exhaust emissions than a 4-stroke, it produces 5 to 10 times less Carbon Monoxide (CO) while idling or trolling.
Who makes Evinrude?
Founded by Ole Evinrude in Milwaukee, Wisconsin in 1907, it was formerly owned by the publicly traded Outboard Marine Corporation (OMC) since 1935, but OMC filed for bankruptcy in 2000. It is now working as a subsidiary of Canadian Muntinational Bombardier Recreational Products.
Who makes Tohatsu outboards?
In 1987, Mercury Marine and Tohatsu Corporation created a joint venture called Tohatsu Marine Corporation (TMC) to manufacture smaller outboards. Right now all Mercury models 30 horsepower and less are manufactured by TMC in Japan.
What year did Evinrude ETEC come out?
Evinrude, a brand of the company BRP (Bombardier Recreational Products, Inc.), was officially launched in 2003. The company's history dates back to 1937, when Joseph-Armand Bombardier had his snowmobile patented.
Does Johnson still make outboard motors?
The original company to make Johnson inboard motors and outboard motors was the Johnson Brothers Motor Company of Terre Haute, Indiana, United States. … Bombardier stopped selling outboards under the Johnson brand after 2007, and has moved all sales entirely to Evinrude Outboard Motors.
Are Tohatsu outboards made by Honda?
Honda Motor Co. will begin production of eight outboard models private-labeled for Tohatsu Corporation, beginning in November 2013. The motors are expected to be at Tohatsu dealers in 2014. … Its current 40 to 115 models are direct-injected two-strokes, while the 2.5 to 30 hp outboards are four-strokes.
How long do outboard engines last?
On average, an outboard motor will run about 1,500 hours or 7 to 8 years. Each outboard motor will be different but if you keep up maintenance and take care of the motor it can last much longer.