How do you convert GPM to tons?
How do you convert GPM to tons?
Conversion chart – gallons US per minute to tonnes (water mass) per hour
- gallon US per minute to tonnes (water mass) per hour = 0.23 ton/hr.
- gallons US per minute to tonnes (water mass) per hour = 0.45 ton/hr.
- gallons US per minute to tonnes (water mass) per hour = 0.68 ton/hr.
Is 2.5 gallons per minute good?
GPM means Gallons Per Minute. Also known as “flow rate”, GPM is a measure of how many gallons of water flow out of your shower head each minute. Since 1992, a maximum of 2.5 GPM is the federally mandated flow rate for new shower heads. This means no more than 2.5 gallons of water should flow out each minute.
How many gpm does a house use?
A toilet will normally use about 2-3 gallons per minute (gpm), a shower from 1.5 to 3.0 gpm, a bathroom or kitchen faucet from 2-3 gpm, a dishwasher from 2-4 gpm, and a washing machine from 3-5 gpm.
How many GPM can a 4 inch pipe handle?
Metric PVC Pipe
| Assume Average Pressure. (20-100PSI) About 12f/s flow velocity | ||
|---|---|---|
| 4″ | 3.85-3.95″ | 480 gpm |
| 5″ | 4.95-5.05″ | 750 gpm |
| 6″ | 5.85-5.95″ | 1100 gpm |
| 8″ | 7.96″ | 1900 gpm |
How many heads are in a zone?
At different pressures, the sprinkler head and nozzle will consume different amounts of water. For example, at 35 pounds per square inch (PSI) the 5000 Series Rotor using the 3.0 nozzle will use 3.11 gallons per minute (GPM). If your home’s water capacity was 10 GPM, you could place 3 heads per zone.
How many gpm do I need for irrigation?
Measure how long it takes, in seconds, to fill the bucket. Calculate the flow rate by multiplying the bucket size by 60 and dividing by the time in seconds. If, for example, the 5 gallon bucket took 18 seconds to fill, then 5 x 60/18 = 16.67 GPM.
How long should I run my drip irrigation system?
30-minute