How do I get HDMI sound through my receiver?

How do I get HDMI sound through my receiver?

Option 1: HDMI connection using the ARC feature

  1. Connect an HDMI cable to the HDMI ports labeled ARC or the port identified in your manual that supports ARC.
  2. On your TV menu, set Speakers to Audio system.
  3. Turn on the Control for HDMI setting on your TV, and the A/V receiver or home theater system.

How do I connect my Yamaha receiver to my HDMI TV?

Just use the HDMI 1 port on the back of your TV. Connect the other end of the cable to your receiver. You’re looking for something labeled HDMI Out; it’s usually a different color. If necessary, connect a digital optical cable to the back of your TV (optical out), and the other end to your receiver (optical in).

How do I play sound through my Yamaha receiver?

Using the Yamaha remote, press ON SCREEN, go to Setup, and select HDMI. In the HDMI menu select ARC and turn it on. By default AV4 is setup as your ARC input on TV1 and AV1 on TV2. You can change this by adjusting the TV Audio Input in the HDMI menu of the receiver.

Why does my Yamaha receiver keep switching to AV4?

This is a side effect of using the HDMI ARC feature as the default is AV1. Either disable HDMI ARC and use an optical cable from the TV to the AVR, or use a programmable remote (eg. Harmony) that can automatically switch the input back to the one you originally selected.

How do I connect my Yamaha receiver to my TV without HDMI?

How do you connect a TV to a receiver without HDMI? You can use any RCA audio cables, a composite video cable, a 5-cable component RCA video cable, or an HDMI converter that matches the input option you have available.

How do I connect my phone to my Yamaha receiver?

From any Android Device

  1. Open the App Drawer.
  2. Go to Settings.
  3. Tap Bluetooth. You may need to select Connections first.
  4. Ensure Bluetooth is On and then select your device from the list below.

How do I adjust the speaker volume on my Yamaha receiver?

So, the first thing you do is press the [TEST] button on the remote. Next, adjust the [MASTER VOLUME CONTROL] until you can adequately hear the level from the main left and right speakers.

How do I adjust speaker volume?

To access it, open the Control Panel, and go to Hardware and Sound. In the Sound section, click or tap the link that says “Adjust system volume.” In the Volume Mixer window, set the desired sound level for the speakers, system sounds, or for the Windows apps that you have open.

Why does my amplifier use negative DB for volume?

When you turn up the volume of an amp you are actually decreasing the amount of restriction placed on that amp and in turn it plays louder. The negative number scale is a more accurate way to indicate the volume output.

What does straight mean on Yamaha receiver?

When STRAIGHT is pressed and the straight decode mode is enabled, the unit produces stereo sound from the front speakers for 2-channel sources such as CDs, and produces unprocessed multichannel sounds for multichannel sources. Each time you press the key, the straight decode mode is enabled or disabled.

What is DSP 3D mode?

Enjoying stereoscopic sound fields (CINEMA DSP 3D) It allows you to easily create sound fields like actual movie theaters or concert halls in your room and enjoy natural stereoscopic sound fields. To use the conventional CINEMA DSP, set CINEMA DSP 3D Mode in the “Setup” menu to “Off”.

What is a DSP mode?

One of the most practical and fun DSP modes that exists in nearly every AV receiver is the 7-channel Stereo or All-Channel Stereo mode that sends a stereo signal to every pair of amps in your receiver (and often a summed mono signal to your center channel as well). The result is a lot of sound in your theater.

What is DSP Level Yamaha?

DSP level – adjusts the amount of DSP applied to the source. I found kicking this parameter down a notch or two on most of the program modes really helps to make them sound more natural. Initial delay – changes the apparent size of the soundfield by adjusting the ratio of direct vs reflected sound.

How do I setup my Dolby Atmos on my Yamaha receiver?

The overhead speakers are enabled under the manual speaker configuration menu.

  1. Press Setup.
  2. Navigate to Speaker Configuration.
  3. Select Manual Set Up.
  4. Under Configuration: Select Front Presence Speakers & Press Enable.
  5. Select Rear Presence Speakers & Press Enable.
  6. Press Return.

What is dynamic range on Yamaha receiver?

The Old Days: Wearing Out the Volume Control The YPAO™ Dynamic Range Control (DRC) feature offered by many Yamaha AV receivers is one of the reasons that watching movies at home is better now than ever before. (“Dynamic range” refers to the difference between the softest parts of the audio and the loudest.)

Should I use dynamic range compression?

Professionals say that compression should be used on each individual track, then if needed, over the final track as a whole. Dynamic range is good because it adds flair, nuance, and color to audio. Compression is used to illustrate that where musicians want it to be, and that’s done by reducing variation elsewhere.

What is Yamaha dialogue lift?

One of these, Dialogue Lift, uses the front effects speakers (Yamaha calls them Presence speakers) to “raise” the location of dialogue so it sounds like its coming directly from the TV screen, not from a speaker stashed in a stand beneath the TV.

How can I improve my home theater dialogue?

Raising the center channel volume relative to the left/right and surround channels makes dialogue louder than the music and sound effects, so it’s easier to understand what the actors are saying. The easiest way to make the adjustment is with your receiver or home theater-in-a-box system’s remote control.

What is DTS dialogue control?

The DTS:X Dialog Control function is a function which adjusts the dialog levels during playback of the DTS:X stream. This function enables you to increase the dialog levels in contrast with the background sound and hear dialog easily even under noisy circumstances.