How do I fix the F11 code on my Kenmore washer?
How do I fix the F11 code on my Kenmore washer?
Unplug or turn the circuit breaker off for 10-20 minutes. Reconnect the unit to the power source by turning the breaker back on or plugging the washer back in. Press the Pause/Cancel/Stop button twice to clear the display.
Can you reset a Kenmore washing machine?
How do you reset a Kenmore front load washing machine? To perform the Master Reset, carefully unplug the washing machine from the power outlet and leave it unplugged for one minute. Next, open and close the door of the washing machine 6 times within 12 seconds to send a “reset” signal to all the components.
How do you manually drain a Kenmore Elite washer?
How to Manually Drain Water From a Kenmore Washing Machine
- Pull the washer away from the wall until you have enough room to access the back panel of the machine.
- Place the bucket behind the washer next to the drain hose.
- Unhook the drain hose from the drainpipe.
How do you know if your washing machine drain pump is broken?
Put your finger into the drain outlet and feel the impellers if the pump freely turns. One or more of them may be broken. If so, you’ll be able to feel them while you’re turning the pump flywheel with your other hand. You also may see broken pieces of plastic in the bottom of the pump housing.
Why will my washer not agitate?
If your washer won’t agitate but spins, a broken agitator may be to blame. The output shaft of the transmission is splined to the agitator to secure it in place. Over time, some of the components of the agitator can wear down or break with normal usage, causing your washing machine not agitating issue.
How do I view my Apple serial number?
Depending on the product, you can find your serial number:
- On the surface of your product.
- On a Mac, by choosing About This Mac from the Apple menu.
- On an iPhone, iPad, iPod touch, iPod or Apple Watch, in Settings > General > About.
- In the Finder or iTunes, if your product syncs with your computer.
How do you read a production date code?
The first two digits indicate the year while the 3rd and 4th digits indicate the week of manufacture. The date code can be found printed on the product label.