Lifehacks 

Are all MCM belts reversible?

Joe Ford

Are all MCM belts reversible?

That’s why our “M” belts are reversible, interchangeable, and customizable. You can stop by any MCM location to have your belt sized, or follow these quick and simple DIY instructions at home.

What does cut to size belt mean?

Men’s belts come in a range of sizes from 30″ to 42″, even sizes only. Our cut to size belts fit 30″ through 42″. For a comfortable fit, order one size larger than your actual waist size. Cut to size belts are 42″ long, and can be cut down to your personal. Simple instructions are included with the belt.

How do you cut a one size fits all belt?

Cut-To-Fit Belt Tutorial

  1. Wrap the belt around your waist and measure the excess leather.
  2. Lay the belt flat with the screw facing upward.
  3. Unscrew the buckle from the waist strap.
  4. Remove the buckle from the waist strap.
  5. Using the previously measured dimensions from step 1, mark off the extra leather.

What do you do if your belt is too big?

It is simple. Here’s how:

  1. Put the belt around your waist (make sure it is tight).
  2. Loop the end through the regular opening.
  3. Loop it under the rest of the belt around your waist…
  4. And then back over and through the hole formed by this process.
  5. Fix the pin.

What do you do if your belt is too long?

How to resize + fix a too long belt or purse strap

  1. Use a small clear or colored elastic. Works best for: skinny belts or straps, or, black straps that are easy to match with black rubber bands.
  2. Try a Belt Loopy. Works best for: wide leather belts that you wear over a dress or skirt.
  3. Style the tail into a single or pretzel loop.
  4. Have a cobbler shorten the strap.

How do you know if a belt fits you?

An easy way to determine belt size is to simply “add 2″ to your off-the-rack trouser size. For example, if you wear a 36” waist trouser, then a 38 belt size will be a safe bet. Most will find this simple formula works best for pants worn at a traditional height–close to the natural waistline.

Where should your belt end?

When measuring a belt, you should do it from the edge of the buckle to the middle hole. Fitting a belt to the middle hole is important because it gives you more flexibility with your belt. Usually, standard belts have five holes, one inch apart each, but some manufacturers may use six or seven holes.