When can you cross a solid yellow line?
When can you cross a solid yellow line?
Yellow lines mean that vehicles on each side of the yellow line must travel in opposite directions. A yellow line should always be on the driver's left side. Solid yellow lines, single or double, indicate that passing is not permitted. Broken yellow lines indicate that passing is permitted.
Where is passing not allowed?
Passing is illegal and unsafe when your line-of-sight is restricted or limited by a curve, hill, or weather conditions, cross-traffic is present, when there is a solid yellow line on your side of the roadway, or a school bus is loading or unloading children. You must constantly be aware of passing vehicles.
What are the two basic rules for approaching an unmarked intersection?
If two vehicles arrive at the intersection at roughly the same time, the driver of the vehicle on the left must give way to the driver of the vehicle on the right. When making a left turn, yield to all oncoming traffic EVEN if you were the first one to enter the intersection.
When you want to back out of a parking space you should do it slowly and look?
(To back out of an angled parking space, always back slowly and look over your right shoulder as you back up. Also, you will need someone to guide you while you back up from outside of the car.)
Can you cross a dotted yellow line?
(1) Solid yellow line: No passing when solid yellow line is on your side. (2) Double solid lines: No vehicle may pass. (3) Broken yellow line: May pass if movement can be made in safely. Many roads have two or more lanes going in your direction.
What are some points to remember when passing and being passed?
Give yourself at least one vehicle length distance between the front end of your car and the back end of the one you're passing. Avoid being aggressive with your speed and give yourself plenty of time and space between the vehicle. Don't slam on the gas to safely arrive in front of the slow car.
How do you drive when windy?
If there's no gap to make a lane change, ask for permission by using your turn signal and making eye contact with another driver. Drivers are more likely to cooperate if you treat them courteously. Look for stoppages that could cause you to be stuck in an intersection.
Is it illegal to pass on one way streets?
Passing on the right is only permitted when: The vehicle you are overtaking is making, or is about to make, a left turn. You are driving on a one-way street. You are driving on any road where traffic is restricted to one direction of movement (such as a multiple lane highway)
How can I pass another car?
Move to the left lane for passing. Speed up by about 10-15 mph over the speed of the vehicle that you are passing. After you pass the vehicle in front of you, look over your right shoulder and make sure that it is clear and you have enough space to return to your lane and then safely return to your lane.
Is it illegal to pass in school zones?
In some school zones, it is illegal to either change lanes or pass a car. This means that if the car in the lane next to you is only doing 15 m.p.h., you can not pass it. … Most drivers are aware of school buses when they are on the road with them, but many drivers aren't.
How far in front of a hill is passing not permitted?
A driver may not pass within 100 feet of, or in the middle of, an intersection. Drivers may not pass on a curve (even a slight curve) when they cannot see far enough to guarantee safety. Drivers may not pass while ascending a hill when they cannot see far enough to pass safely.
What is alternate merging procedure?
In traffic engineering, the late merge or zipper method is a convention for merging traffic into a reduced number of lanes. Drivers in merging lanes are expected to use both lanes to advance to the lane reduction point and merge at that location, alternating turns.
What color and shape is a no passing sign?
The pennant shaped sign is always yellow and always placed on the left side of the road. It has the text “No Passing Zone” and marks the beginning of an area where you cannot pass other vehicles on left side of the road.
How far ahead should you check traffic signals?
In the city/urban area, you should look at least two blocks or two traffic signals ahead. In a suburban area, you should look at least three blocks or three traffic signals ahead. In a rural area, you should look at least a quarter of a mile ahead.
Is Passing prohibited at intersections?
If no distance is stated, sticking to the “not within 100 feet” rule is advisable. Keep in mind that passing near railroad crossings and intersections is prohibited, even if the vehicle you are passing appears to be stopped for no reason.
What should you do when an emergency vehicle with a siren and flashing lights approaches you?
When you hear a siren or see red flashing lights from an ambulance or fire engine, if they are following you, you must slow down and pull over. Stop if necessary. If a police car is following you with its lights flashing (which will be red and blue), then you must stop unless it passes you and continues on its way.
When you see this sign what should you do?
Rule 264 of the Highway Code states: “You should always drive in the left-hand lane when the road ahead is clear. … "Middle lane hogging is when vehicles remain in the middle lane longer than necessary, even when there aren't any vehicles in the inside lane to overtake."
When driving at slow speeds you should use?
Many roads have two or more lanes going in your direction. On these roads, drivers traveling at slower speeds should use the right lane, as the speed of traffic increases as you move to the left.
Can you pass on city streets?
Passing on city streets can be challenging. … So, avoid passing on city streets. But if you must pass because, for example, a delivery truck blocks the only lane, be very careful and judge the distance of oncoming traffic before you pass.
How can you identify a one way street?
You will recognize one-way streets from the signs and markings on the road. Broken white lines separate traffic lanes on one-way streets. You will not see yellow markings on a one-way street. When driving on one-way streets with multi-lanes, always choose the lane with fewest hazards.
What is a passing zone?
The Do Not Pass (RB-31) sign marks the beginning of a No-Passing zone and it indicates to drivers that they must not overtake another vehicle within a specified zone. … The sign informs drivers that passing is permitted when safe to do so. It also implies that vehicles should proceed with caution and care when passing.
Is it best to use the lights when driving in fog?
D. Hazard flashers. If you must drive in foggy conditions, you should use your low beam headlights, as well as your fog lights, if your vehicle has them. High beams direct their light upwards, where it can bounce off the fog and into your eyes, reducing visibility even more.
When should you use your headlights?
Headlights are required to be used 1/2 hour after sunset to 1/2 hour before sunrise, when windshield wipers are being used, when visibility is less than 1000 feet, or when there is insufficient light or adverse weather.
Which lane is the acceleration lane?
A defensive and courteous driver will move to the left lane when approaching an acceleration lane during times of lower traffic flow. If you cannot move to the left, then change your speed slightly to create a gap for merging traffic.
What is the fundamental speed law?
The Basic Speed Law states that you must never drive faster than is safe for present conditions, regardless of the posted speed limit.
How do you drive on the streets?
When approaching an all way stop you should slow down, stop and look left, ahead, right, and left again. When stopped at a stop sign, the stop should be held for a minimum of 3 seconds.
Is it legal to pass a mail truck?
Assuming you do have to drive on the left side of the road to pass a stopped vehicle, it is a violation of the law. There is no exception for passing stopped vehicles of any kind. … If the truck was far enough to the right, you could pass the stopped truck without driving on the left side of the road.
When you are driving on a highway that does not have a paved shoulder If your vehicle breaks down?
When you are driving on a highway that does not have a paved shoulder, and your vehicle breaks down you should: A. Try to stop your vehicle with your right wheels off the paved surface of the highway and your left wheels still on the paved surface.