How do you adjust a tailgate striker?

How do you adjust a tailgate striker?

Open the tailgate and loosen both strikers about 1/3 to 1/2 of a turn, enough for striker movement without losing the nut. Close the tailgate. Use hand pressure (at point a) to adjust the strikers, balancing pressure side to side to ensure that the strikers make contact simultaneously and don’t cause binding.

What is a striker plate?

A door strike plate or striker plate attaches to the door jamb and receives a latch or dead bolt when locking or latching a door.

What is door Striker?

Door strikers are hooks or bolts that latch up the doors on a vehicle. The striker is designed to create a tight fit between the door and the seal on the cab.

What is an EZ lift tailgate?

EZ Lift-and-Lower tailgate is a General Motors convenience technology that makes using a pickup truck’s tailgate easier and more convenient.

Why is my car rattling at the back?

When the components that hold your exhaust together fail, they can cause misalignment in the system. When this happens, a rattling noise is common. If the rattling is caused by your muffler, it will most likely originate near the rear of your vehicle.

What causes a rattling sound when accelerating?

If you hear a pinging or rattling sound when accelerating, low-octane fuel could be the cause. Pinging (also called pre-ignition or detonation) can also be the result of carbon deposits, a bad knock sensor, overheating or incorrect ignition timing.

Why do you need a strike plate?

The main function of this simple plate is to secure the door and protect you, your loved ones and your possessions against intruders. It functions as an anchor point, a way to reinforce the door frame by engaging the deadbolt and keeping the door locked tight.

What is the purpose of a striker plate?

A plate installed in a storage tank, at a point directly beneath the drop tube or gauging port. The purpose of the plate is to absorb the impact of repeated insertions of gauge sticks, and to help dissipate the impact of product being dropped into the tank.

Does a deadbolt need a strike plate?

The answer is simple—better door security. Kick-in burglaries often occur because of weak or poorly fitted strike plates. Like all security measures, this is just another layer. There’s little point to having an excellent deadbolt and the best strike plate if the door jams, hinges, door and door frames are weak.

Do door plates come in different sizes?

Standard kick plates are either 6 or 8 inches tall. If your door has fewer than 8 1/2 inches between the bottom and the decoration, select a 6-inch kick plate. If it has fewer than 6 1/2 inches, custom order a kick plate to fit in the space.

Why does my truck bed rattle?

Could be the bed liner In case your pickup truck rocks the common drop in bed liner, it being overly loose could be the issue of, you guessed it, the mysterious rattles. Check if the liner is sitting snug in between the attachment points, such as the bed rails.

What is EZ Lift & lower tailgate?

How do you remove a EZ tailgate lift?

Open the tailgate to a 45-degree angle, allowing slack in the cable. Pull the passenger’s side of the tailgate hinge straight out (with the tailgate remaining open at a 45-degree angle), then pull the driver’s side out. Hold the tailgate firmly on one side, and have your assistant do the same on the other side.