Why does my LG dryer keep shutting off?
Why does my LG dryer keep shutting off?
INTERRUPTED POWER: The cycle may have shut off due to an interruption of the power supply. SMALL LOADS: Small loads may also cause the cycle to end abruptly because the clothes will not brush against the sensors at the front of the drum.
Where is the sensor on LG dryer?
The moisture sensor is located in the front of the dryer behind the lint trap. It is important that there are enough clothing items tumbling past the sensor for the dryer to effectively measure remaining moisture.
What does signal mean on LG dryer?
Dryers End of Cycle Signal
What is the antibacterial setting on LG dryer?
Antibacterial or Sanitize: Dryer cycles or options that reach the specific temperature and time needed to kill 99.9% of bacteria in the load. Sanitize cycles reach temperatures in excess of 140°F to kill off most nasty germs—just like dishwashers. …
How do I adjust the temperature on my LG dryer?
In COOL and DRY modes, the up and down arrow keys can be used to adjust the temperature up to 86°F or as low as 60°F. Adjustments are made in one degree increments. The temperature can be adjusted to display in either F or C by pressing both the up and down arrow keys at the same time.
How do I change the settings on my LG dryer?
1. Turn on the dryer and turn the cycle selector knob to select the desired cycle. 2. Use the cycle setting buttons to adjust the settings for that cycle.
How do I use the steamfresh cycle on my LG dryer?
Simply select the STEAM FRESH™ cycle, or add a STEAM option to the selected cycles. Time and status display shows the settings, estimated time remaining, options, and status messages for your dryer. When the dryer is turned on, the light in the display will illuminate.
How do you use the sanitary cycle on a LG dryer?
to use the steam freshtm cycle: Turn on the dryer and turn the cycle selector knob to select the Steam Fresh™ cycle. 2. To add an option function, select Reduce Static, Easy Iron, or Wrinkle Care.
What is steam cycle on LG dryer?
The Tub Clean cycle uses steam to help clean the unit and help reduce mildew, mold, unwanted buildup, and odor. Your LG dryer is also equipped with innovative steam features that help eliminate odors and sanitize your clothing without a lengthy wash cycle.
How do you use a steam cycle on a dryer?
Simply toss your clothing items into the dryer for a few minutes, and the steam will remove the odor and/or wrinkles from your clothes! This feature could significantly reduce the amount of dirty laundry you have to wash each week.
Is LG Steam dryer worth it?
Steam dryers are slightly more expensive than regular dryers, but they do have some neat features you may want to explore. Even though steam doesn’t get tough wrinkles out, it may relax them somewhat, making them easier to iron out later. Steam dryers are better at deodorizing laundry, too.
Do steam dryers need water hookup?
Connecting the steam dryer requires that you tap into the water supply going to your washer or establish a water source from an independent faucet. Hooking up a steam dryer will also require the same procedures as hooking up a standard dryer, including connecting the exhaust tubing for ventilation.
Does LG steam dryer need water line?
There is no water hookup, but none is needed. The steam function is controlled by a reservoir located in the upper left hand face of the dryer. Easy to access, remove and fill. This is a very helpful feature.
What setting on the dryer shrinks clothes?
Use a short cycle and high or medium heat for pure cotton clothes. If you want your 100% cotton garment to shrink between one size and one-half of a size, use a gentle setting (low agitation) and check it halfway through the cycle to see if it has already shrunk to the desired size.