What is the USB port on my ATT Uverse box for?

Joe Ford

What is the USB port on my ATT Uverse box for?

The USB slot on a Residential Gateway can be used as a network connection… Though the use case is rare[*]. The USB slot on a Set Top Box is currently only available for one use: the installation of a USB Radio Frequency Receiver dongle, which can be paired with the U-verse TV Point Anywhere RF Remote Control.

How do I hook up my Arris NVG589?

Connect the yellow Ethernet cable from the Ethernet port on the gateway to the Ethernet port on your PC. Plug one end of your phone cable into the gateway’s Phone Lines 1 & 2 port and the other end into a standard phone or cordless base station. Connect the black power adapter to the power port on the gateway.

How do I port forward Arris NVG589?

Set up port forwarding

  1. Go to your gateway settings.
  2. Select the Firewall tab.
  3. Enter the Device Access Code found on the side of your gateway.
  4. Select NAT/Gaming.
  5. Select Continue.
  6. From the Service drop-down, select the application for port forwarding.

Does Arris NVG589 have a WPS button?

The only option there is is to connect via WPS push button. …

What is WPS button for?

Using the WPS (Push Button) feature to connect to a wireless network. Wi-Fi® Protected Setup (WPS) is a built-in feature of many routers that make it easier to connect Wi-Fi enabled devices to a secure wireless network.

How do I put my NVG589 in bridge mode?

How do I setup bridge mode in the Motorola NVG589?

  1. Login to the NVG589’s web-based configuration interface in your web browser.
  2. Go to the “Home Network” -> “Subnets & DHCP” tab.
  3. If your “Device IPv4 Address” is in the same subnet as your personal router’s LAN segment, you should change your personal router’s network configuration to use a different subnet like 192.168.

What is Arris NVG589?

The NVG589 features 400mW high-power 802.11g/b/n Wi-Fi. It uses multiple-input and multiple-output MIMO technology with 802.11n, eliminating the need for wired connections and enabling users to easily network all of their wireless 802.11b/g/n-equipped devices.

How do I know if port 443 is open?

You can test whether the port is open by attempting to open an HTTPS connection to the computer using its domain name or IP address. To do this, you type https://www.example.com in your web browser’s URL bar, using the actual domain name of the server, or https://192.0.2.1, using the server’s actual numeric IP address.

What’s my port number?

How to find your port number on Windows

  1. Type “Cmd” in the search box.
  2. Open Command Prompt.
  3. Enter the “netstat -a” command to see your port numbers.

How do you check if ports are blocked?

Check port 25 in Windows

  1. Open “Control Panel“.
  2. Go to “Programs“.
  3. Select “Turn Windows features on or off ”.
  4. Check the “Telnet Client” box.
  5. Click “OK“. A new box saying “Searching for required files“ will appear on your screen. When the process is completed, telnet should be fully functional.

How do I unblock ports?

How to unblock ports

  1. Click Start.
  2. Type Control Panel and press Enter.
  3. Click System and Security.
  4. Click Windows Firewall.
  5. Select Advanced settings, and then select Inbound Rules in the left pane.
  6. Right-click Inbound Rules, and then select New Rule.
  7. Select Port, and then click Next.
  8. Select TCP as the protocol to apply the rule.

How do I unblock ports blocked by my ISP?

If it is that your ISP is blocking ALL the ports there is nothing you can do about it but call them and ask nicely. Otherwise it is likely an issue with your router settings or application settings. Very few ISPs block ALL ports. Most residential ISPs will block the common ports (80, 443, 21, 22, 23, 53, etc).

How do I unblock port 80?

To open port 80

  1. From the Start menu, click Control Panel, click System and Security, and then click Windows Firewall.
  2. Click Advanced Settings.
  3. Click Inbound Rules.
  4. Click New Rule in the Actions window.
  5. Click Rule Type of Port.
  6. Click Next.
  7. On the Protocol and Ports page click TCP.

How do I open a port 443 router?

To port forward TCP port 443, go to [NAT] > [Open Ports] and click on the first un-used index entry to go into the settings for that Open Ports entry.

How do I unblock ports on my router?

Head over to your router’s settings. Enter your credentials (device username and password). Look around for the Port Forwarding tab. On the Port Forwarding tab, enter your device’s name and open your preferred port—for example, type 8080 to open port 8080.

What ports should be blocked?

For example, the SANS Institute recommends blocking outbound traffic that uses the following ports:

  • MS RPC – TCP & UDP port 135.
  • NetBIOS/IP – TCP & UDP ports 137-139.
  • SMB/IP – TCP port 445.
  • Trivial File Transfer Protocol (TFTP) – UDP port 69.
  • Syslog – UDP port 514.

What ports should be open on my router?

A router needs no incoming ports open(hence some here have answered that a router needs no ports open, as that is normally what is meant when talking about open ports on a router). And needs outgoing ports 80(http) and 443(https) open(not blocked), in order to allow for browsing.

Should I close port 21?

The protocol contains well-known design flaws that can be used by attackers. This port should be blocked. Port 21 – Used by FTP to allow file transfers. Most hosts on your network are not intended to be FTP Servers – don’t leave doors open that don’t need to be open.

Does SFTP use port 21?

Communication protocols The acronym stands for “File Transfer Protocol”. It usually runs over TCP port 21. SFTP – another, completely different file transfer protocol that has nothing to do with FTP. SFTP runs over an SSH session, usually on TCP port 22.

Is port 22 secure?

Avoid Port 22 Port 22 is the standard port for SSH connections. If you use a different port, it adds a little bit of security through obscurity to your system. Security through obscurity is never considered a true security measure, and I have railed against it in other articles.

What is the use of port 21?

Port numbers 21 and 20 are used for FTP. Port 21 is used to establish the connection between the 2 computers (or hosts) and port 20 to transfer data (via the Data channel).

What is port 443 normally used for?

Port 443 is used explicitly for HTTPS services and hence is the standard port for HTTPS (encrypted) traffic. It is also called HTTPS port 443, so all the secured transactions are made using port 443.

How do I unblock port 21?

To open FTP port 21 you need to change Windows Firewall settings.

  1. Click on Start > Settings > Control Panel > Click on Security center.
  2. At the bottom window (Manage security settings for:)
  3. Click on this option.
  4. Select Exceptions tab > Click on Add Port button.
  5. Add port 21 and 20 as follows.

Does port 21 use UDP or TCP?

Well-known ports

Port TCP Description
20 Yes File Transfer Protocol (FTP) data transfer
21 Yes File Transfer Protocol (FTP) control (command)
22 Yes Secure Shell (SSH), secure logins, file transfers (scp, sftp) and port forwarding
23 Yes Telnet protocol—unencrypted text communications

What ports can I use for FTP?

port 21

Is FTP UDP or TCP?

FTP is a TCP based service exclusively. There is no UDP component to FTP. FTP is an unusual service in that it utilizes two ports, a ‘data’ port and a ‘command’ port (also known as the control port).

What is port 110 used for?

Port 110 is used by the POP3 protocol for unencrypted access to electronic mail. The port is intended for end-users to connect to a mail server to retrieve messages. I can’t imagine any reason that this port would be used in this case. Port 25 is used by the SMTP protocol to send mail.