What is Cisco LEAP Module Windows 7?
What is Cisco LEAP Module Windows 7?
Cisco LEAP is an 802.1X authentication type for wireless LANs (WLANs) that supports strong mutual authentication between the client and a RADIUS server using a logon password as the shared secret. It provides dynamic per-user, per-session encryption keys.
Does Cisco Need leap module?
Cisco LEAP module is largely used in companies or education wireless systems. So, even if you remove it intentionally or unintentionally it won’t create any problem if you do not use Cisco Leap on your network domain. You can install Cisco LEAP module if you want to use it.
What is a Cisco EAP FAST module?
Cisco EAP-FAST Module is an Authentication via Secure Tunneling (EAP-FAST), an EAP type from Cisco Systems. EAP-FAST provides protection from a variety of network attacks. If you haven’t used any CISCO products and not connected to a domain network, you may go ahead and delete them.
What is Cisco LEAP Module software?
The Cisco Leap Module is an 802.1X authentication program for your LAN and WLAN that supports strong authentication between the client and RADIUS servers using credentials such as a password to log in as a shared secret. This program is installed on a PC, computer or laptop running Windows Vista/ XP/7/8/10.
How do I enable switch ports?
Select Group Port Config. In the graphic for each switch that you want to configure, select the ports that you want to configure. Selected ports display green. Click the Enable Port button to enable or disable the selected ports.
How do I check my port settings?
You can view the summary or detailed information on the switch ports using the show interface status command. To see the summary information on all ports on the switch, enter the show interface status command with no arguments. Specify a particular module number to see information on the ports on that module only.
Why do you need to use the no shutdown command on an interface?
The no shutdown command enables an interface (brings it up). This command must be used in interface configuration mode. It is useful for new interfaces and for troubleshooting. When you’re having trouble with an interface, you may want to try a shut and no shut.
Which command is used to show the interface status of a router?
show ip interface brief” command
How do I bring up a Cisco interface?
To bring the interface up, use the no shutdown command under interface configuration mode.
How do I copy my startup config?
Use the copy nvram:startup-config {ftp: | rcp: | tftp:} command to copy the startup configuration file to a network server. The configuration file copy can serve as a backup copy. Use the copy system:running-config nvram:startup-config command to copy the running configuration to the startup configuration.
Where is startup config stored?
NVRAM
How do I get to startup-config?
To display the current running configuration, enter the show running-config command. Enter the copy running-config startup-config command to save the current running configuration to the startup configuration file in NVRAM. To display the startup configuration, enter the show startup-config command.
What is show startup-config?
To display the contents of NVRAM (if present and valid) or to show the configuration file pointed to by the CONFIG_FILE environment variable, use the show startup-config EXEC command.
Where is the reset button on Cisco router?
Press the Reset button located at the back of the device with a pin for approximately 15 seconds or until the power light on the front of the device starts flashing. The Router reloads and is set to the default configuration settings.