What are the five safety rules?

What are the five safety rules?

Ensure that employees are properly trained in the safe use of hand tools. Replace or repair defective tools. Keep cutting tools sharp and cover sharp edges with a suitable covering to protect the tool and to prevent injuries from unintended contact.

What is the proper handling of tools?

Pointed tools such as chisels and screwdrivers should never be carried in a worker's pocket. Acceptable ways to carry them include in a toolbox, pointed down in a tool belt or pocket tool pouch, or in the hand with the tip always held away from the body. Tools should always be put away when not in use.

What are the basic hand tools and equipment?

Categories of hand tools include wrenches, pliers, cutters, files, striking tools, struck or hammered tools, screwdrivers, vises, clamps, snips, saws, drills and knives. Outdoor tools such as garden forks, pruning shears, and rakes are additional forms of hand tools.

What are power hand tools?

A power tool is a tool that is actuated by an additional power source and mechanism other than the solely manual labor used with hand tools. The most common types of power tools use electric motors. Power tools are classified as either stationary or portable, where portable means hand-held.

What are some safety rules?

– Cold chisels, punches, hammers, drift pins and other similar tools have a tendency to mushroom from repeated blows. Dress them down as soon as they begin to crack and curl.

What is hand tool safety?

DON'T work with OILY or GREASY hands. Handle SHARP-EDGED and POINTED TOOLS with care. Always carry pointed tools by your side with the points and heavy ends DOWN. SECURE all small work & short work with a vise or clamp. NEVER carry tools in your pockets.

How do you maintain hand tools?

Clean, Inspect and Care for Tools. Make it a habit to clean tools after each use before you return them to storage. Wipe them down with a rag or old towel and be sure they are free of dust, grease and debris before you put them into their proper places. This is also an opportunity to look for any damage or defects.

What is farm tool safety?

Be aware of what you are doing and where you are going. Adjust equipment accordingly. This means keeping all guards, shields and access doors in place when operating equipment, and making necessary alterations to equipment to fit operational conditions. Keep children and animals away from working areas.

What are the safety measures in the use of tools and equipment?

Issue personal protective equipment to your employees and make sure they wear them properly. This comprises of items like safety goggles, hard hats, etc. DON'T ALTER YOUR TOOLS. Never remove guards or disable safety devices on power tools.

Which hand held power tools must be equipped with a constant pressure switch?

Other hand-held powered tools such as circular saws having a blade diameter greater than 2 inches, chain saws, and percussion tools without positive accessory holding means must be equipped with a constant pressure switch that will shut off the power when the pressure is released.

How do you handle tools safely?

Discard any damaged wrenches (e.g., open-ended wrenches with spread jaws or box wrenched with broken or damaged points). Select the correct jaw size to avoid slippage. Wear safety glasses or a face shield (with safety glasses or goggles) where there is a hazard of flying particles or falling debris.

What are the safety measures in handling different tools and equipment?

Wearing of Safety Equipment During many physical activities, there is the potential for contact between children and objects (such as bats, balls or sticks), or between children and other children (e.g. basketball or other sports played in a small space such as tag games).

How are power tools categorized by OSHA?

The types of power tools are determined by their power source: electric, pneumatic, liquid fuel, hydraulic, and powder-actuated. To prevent hazards associated with the use of power tools, workers should observe the following general precautions: Secure work with clamps or a vise, freeing both hands to operate the tool.