Is the 289 a good motor?

Joe Ford

Is the 289 a good motor?

289 V8 Small Block With small dimensions, a relatively small weight, and decent power, the 289 engine was an impressive offering for car buyers. Even in its base variants with a single dual barrel carburetor and 200 HP output, this small 289 V8 engine provided an impressive performance to the iconic Mustang.

Who made the 289 engine?

Ford Motor Company

Is 289 or 302 engine better?

if you want or need the higher rpm the 289 will operate at, then build a 289. if you need the low end torque the 302 will create, then the 302 is a better way to go. peak hp and peak torque the 302 has a slight advantage, but for peak rpm and a flatter torque curve the 289 is better.

How much horsepower does a 289 have?

The 289 (1963-1968) was a high-revving, pint-sized powerhouse producing 195 and 210 horsepower in base trim (two or four barrel carburetor, respectively), and 271 horsepower in HiPo (High Performance) form.

Are 289 and 302 blocks the same?

A 289 and 302 block are identical for the 1968 year. The crank has a slightly longer stroke on the 302. 3″ on the 302, 2.87 on the 289. The piston has a slightly different pin height between the two engines.

How can I make my 289 faster?

To make a 289 run strong you apply the same formula as any sbf, a good combo of heads/cam/intake/exhaust and you are good to go. The 289 uses the same heads, intakes, etc. as any 302/5.0. You can even convert to a roller cam, late model firing order and efi if you want to.

How do I get more power out of my 289?

You can change the intake to a quality dual plane manifold, add headers, increase you cam’s lift and duration, add quality aluminum cylinder heads, increase your compression (beef up the bottom end). You most cost effective way to build a 289 is to not.

What is the difference between a 289 and a 289 Hipo?

what the difference and how do you tell? A couple more differences are the HIPO has larger connecting rod bolts, solid lifters, cupped spring perches for the valve springs and screw in oil galley plugs in the rear of the block. The exhaust manifolds are also unique to the HIPO 289.

What is a 289 special?

Registered. The 289 “Special” was just the 2 barrel 289. Nothing really special about it. It is a 9 to 1 compression 2 barrel that made 195 HP.

How do I identify a Ford 289 high performance engine?

Factory-installed 289 High Performance engines had the vehicle serial number stamped into the righthand side of the block near the battery’s negative-cable attachment point.

How do I identify a Ford 289 engine?

Registered. If you remove the Valve Covers the Heads will be Stamped 289 or 302 inside as well as a Date Code in this format: [7L22] or [8A2] for example. The Casting Numbers for the Cylinder Heads are on bottom and only visible if the Heads are removed, typically.

How many cylinders does a 289 have?

8 cylinder

How do you tell a 260 from a 289?

The fifth digit in the serial number is the engine code. If it is “F” the engine is a 260 and if it is “C” the engine is a 289.

How much does it cost to rebuild a 289 engine?

RE: Cost of 289 rebuild to do it right firgure 1200-1500 for the rebuild. Other then that extras will cost you some cash.

Is 302 better than 351W?

So for equal money, a 351 will have more cubes, more low end torque, and a lower RPM peak. A 302 will have the same HP, but a slightly higher tq peak with lower tq numbers. In almost any situation, cubes are better.

Can you put 351 heads on a 302?

The 351 intake will not fit the 302 at all, it’s too wide. Early 351 heads had bigger valves but also a larger cumbustion chamber. Ford used to sell head bolts made for this. If the heads are for a later 351W, don’t even bother.

Is a 351 Cleveland better than a 351 Windsor?

The 351 Cleveland is a member of the 335 series family of Ford small-block engines. Its large ports and oversize canted valves give it more horsepower and allow it to run at a higher rpm than the Windsor. The valve covers have a twisting curve and are attached by eight bolts. It uses small 14 mm spark plugs.

What is the best small block Ford engine?

Here are 10 great Ford crate engine options:

  • Ford Racing EcoBoost Crate Engine.
  • Roush Racing 511RFE Crate Engine.
  • Ford Racing 427 535HP Crate Engine.
  • Ford Racing 5.0L DOHC Aluminator Naturally Aspirated Crate Engine.
  • ATK High Performance Ford 460 525 Stage 3 Crate Engine.
  • Edelbrock Supercharged 5.0L Coyote Crate Engine.

Why is a 327 better than a 350?

In the vehicle, it’s more of a matter of “gearing” than revs. A 327 with it’s shorter stroke would need shorter gears so it can GET to its revs, where a 350, with its slightly longer stroke and more torque output will pull a little taller gear than the 327 will.

What is the best Ford engine ever made?

The 7 Best Engine Ford Ever Made

  • Ford’s Flathead V8 Engine.
  • 289 V8 Small Block Engine.
  • Ford 428 Cobra Jet Engine.
  • Ford Boss 429 Engine.
  • EFI HO 5.0 Engine.
  • Voodoo V8.
  • Ford Eco-Boost Engines.

Which engines last the longest?

These are the longest-lasting car brands for 2020. Automotive search engine iSeeCars.com analyzed more than 15.8 million car sales in 2019 to identify which brands build the longest-lasting cars. The company found that models from Toyota, Honda, and GMC were the most likely to last for at least 200,000 miles.

What is the best truck engine ever made?

12 Best Pickup Engines of All Time

  • 1929-1936 Chevrolet I-6.
  • 1969-1998 Chevrolet 350 Small-Block V-8.
  • 1989-1998 Cummins B59.
  • 2001-2006 Duramax 6.6L V-8.
  • 1965-1996 Ford 300 I-6.
  • 1972-1978 Dodge 440 V-8.
  • 1991-1994 Chevrolet 454 Big Block.
  • 1994-2002 Dodge Ram 8.0L Magnum V-10.

Is EcoBoost a bad engine?

With proper maintenance and care, most Ford EcoBoost engines proved to be extremely reliable and dependable. If you are looking to get an older Ford model however, especially one that might have a 1.6 or 1.0 engine, definitely have a mechanic take a look at it before you commit to anything.

Will EcoBoost engines last?

The EcoBoost is built tough and is designed to last a long time. A factory standard 3.5 EcoBoost engine can give you up to 250 000 miles (402 000 km), and more if the vehicle has been well taken care of with regularly scheduled maintenance and no major alterations.

Is EcoBoost better than V8?

F-150 Fuel Efficiency While the 3.5-liter EcoBoost V6 F-150 is more fuel efficient than the 5.0 V8, the trick is to stay out of the boost whenever practical. “You can have Eco, or you can have Boost,” as the saying goes.

Which engine is better 2.7 or 3.5 EcoBoost?

The 3.5 has a total power advantage, but it doesn’t FEEL that way. The 2.7 is far quicker to spool up boost, thus accelerates briskly even under light load. The engine design simply loves to rev up to the max torque RPM very very quickly.

What year F150 to avoid?

The worst F150 years, based on total complaints to the National Highway and Traffic Safety Administration, are 2004, 2005, 2006, 2013, 2015, 2016, 2011 2007, 2002, and 2010. The best Ford F150s are 1993, 1994, 1996, 2009, 2012, 2003, 2001, 2014, 2018, and 1998.

How much horsepower can you get out of a 2.7 EcoBoost?

2.7L EcoBoost V6 vs. 3.5L EcoBoost V6

2.7L EcoBoost® V6 Engine 3.5L EcoBoost® V6
325 HP Horsepower 375 HP
400 lb.-ft. Torque 470 lb.-ft.
20/26 MPG (city/hwy) 18/25
9,000 lbs. Max. Towing Capacity 13,200 lbs.

Is 3.5 or 5.0 EcoBoost better?

Both F-150 engines provide plenty of horsepower and torque, guaranteed to get the job done right. The high-output 3.5L V6 EcoBoost engine is rated at 450 horses. This rating is much higher when compared to the 5.0L F-150 V8 engine that is rated at 395-horsepower.