Is painting your mailbox illegal?

Is painting your mailbox illegal?

The mailbox may be any color. The carrier signal flag can be any color except any shade of green, brown, white, yellow or blue. Although the USPS does not regulate the design of mounting accessories, it is pointed out that no part of them is permitted to project beyond the front of the mounted mailbox.

How do you paint a mailbox post?

To paint the mailbox post, remove the mailbox and any address numbers. Sand the post to remove any moss, mold or mildew. Then, fill any cracks or holes with wood filler or paste. Apply two coats of primer and once dry, apply the first coat of paint.

Should I paint my mailbox post?

The primer and paint for your mailbox should be outdoor quality paint. Apply two coats of primer, making sure the first coat is dry before applying the second. Once both coats of primer are dry you can apply the first coat of paint. To paint the mailbox post, remove the mailbox and any address numbers.

Can I spray paint my plastic mailbox?

Applying in a well ventilated area, hold can 8 to 10 inches from surface and spray in a sweeping motion from side to side. EZ Touch Fan Spray tip can be adjusted to spray vertically or horizontally – see back label instructions. Apply a thin coat and allow to dry for 30 seconds.

How do you refinish a mailbox post?

To paint the mailbox post, remove the mailbox and any address numbers. Sand the post to remove any moss, mold or mildew. Then, fill any cracks or holes with wood filler or paste. Apply two coats of primer and once dry, apply the first coat of paint.

How do you paint an aluminum mailbox?

Apply a spray rust sealer to any rusted areas of the aluminum mailbox. Allow the sealer to dry for two hours, and then apply a coat of etching primer to the entire mailbox. Allow the etching primer to cure for four hours, and then apply two coats of acrylic spray paint to the mailbox.

How do you paint a wooden mailbox post?

To paint the mailbox post, remove the mailbox and any address numbers. Sand the post to remove any moss, mold or mildew. Then, fill any cracks or holes with wood filler or paste. Apply two coats of primer and once dry, apply the first coat of paint.