Is it expensive to stain hardwood floors?
Is it expensive to stain hardwood floors?
Typically, a gallon of stain will cover 150–300 square feet of hardwood floors. High-end stain solutions will be priced around $100 on average, while lower-quality stains will cost around $30. Exact pricing for stains will vary depending on the brand, flooring company, and total square footage of the project.
Is it cheaper to refinish or replace hardwood floors?
In general, it will almost ALWAYS be less expensive to refinish your hardwood floors. If you replace them, you need to pay for additional wood as well as ripping up and hauling away existing hardwood. Even if you have this, it will still be less expensive then replacing the whole floor.
Is it cheaper to tile or stained concrete?
Installation of ceramic tile costs between $11 and $22 per square foot, according to the website Concrete Network. Natural stone tiles cost between $20 and $50 per square foot. Staining an existing concrete slab can cost $2 to $15 per foot.
Is stained concrete flooring a good option?
However, stained concrete is also more susceptible to scratches, faded colors, and worn coatings in very high traffic areas. Although both types of flooring are extremely durable, polished concrete comes out on top.
How much does it cost to stain wood floors darker?
This will typically cost $1 per square foot, or $225. For a custom refinish job involving sanding the hardwood flooring, and applying stains, water-based or oil-based finishes, and other finishes like those that are acid-cured, expect to pay $3.75 to $5 per square foot, or $850 to $1,125.
How much does it cost to sand and stain floors?
Can I change the color of my hardwood floors without sanding?
PUT A LITTLE COLOR IN YOUR HARDWOOD FLOOR WITHOUT SANDING! Norton|Vermont Natural Coatings EasyWhey is a revolutionary new product that allows you to easily restore or change the color of pre-finished flooring without sanding.
How much does it cost to stain and refinish hardwood floors?
Homeowners spend $1,550 on average, or between $990 to $2,110 to refinish their hardwood floors. Depending on the condition of the wood, you can expect to pay between $3 to $5 per square foot with 80% of your costs attributed to labor.
How can I darken my hardwood floors without sanding?
A good method of staining hardwood floors darker without sanding is to apply the stain directly after screening, then cover it with clear finish. If you apply a waterborne finish, which dries in a couple of hours, you can complete the entire operation in a day.
How much does it cost to stain concrete floors yourself?
A stain application with patterning and sawed lines will typically cost between $4 and $10 per square foot. Multiple color patterns and intricate sawcuts can run between $5 and $15 per square foot. Elaborate sandblasted stencil work and layered staining can cost between $12 and $25 per square foot.
How many coats of stain do I need for hardwood floors?
The standard for a hardwood floor is at least three coats. This consists of one seal coat (which may be the stain) and two coats of finish. Additional costs of finish may be applied depending on the need.
Can you refinish floors one room at a time?
Refinishing your hardwood floors can be done one room at a time just like you said! keep the room well ventilated, using fans to ensure you are getting fresh air. If you want the stain and polyurethane to be the same throughout your home, make sure that you have enough for each room.
Can oak floors be stained dark?
If you have red or white oak (which makes up the majority of Naperville homes) then there is no problem at all. Oak takes a stain very well and we can stain from a light color all the way up to dark ebony.
How much does it cost to install 1000 square feet of hardwood floors?
The average cost to install hardwood floors on 1,000 sq. feet is between $6,115 and $10,140 with most homeowners spending about $8,127 for materials and professional labor.
What are the most popular wood floor colors?
The hardwood floor refinishing process is easier and less expensive than sanding down to bare wood and takes less time. In a few hours your floors will look as good as new. The job requires using a buffer, which you can rent at a home center, and a vacuum to suck up dust.
Can I refinish my hardwood floors myself?
If the scratches don't go all the way through to the wood, you can scuff-sand your floors with a buffer and apply a fresh coat or two of finish. The hardwood floor refinishing process is easier and less expensive than sanding down to bare wood and takes less time. In a few hours your floors will look as good as new.
Can I stain my wood floors darker?
The answer is usually YES! Many homeowners don't realize that you can change the color of hardwood flooring when you refinish your floors. Yes, it's true…you can go light or dark or red tones or anywhere in between. Most are pleasantly surprised it doesn't matter if you are going light to dark or vice versa.