How much does a dump truck of gravel cost?

How much does a dump truck of gravel cost?

The cost of gravel ranges from $10 to $50 per ton, $15 to $75 per yard, $1 to $3 per square foot, or $1,350 per truck load depending on the rock type, volume, and travel distance. Delivery is included up to 10 miles.

How much area does a ton of gravel cover?

Using 2 inches for the depth, the following measurements are a guide to the amount of gravel coverage per ton: 1/4 to 1/2 inch gravel, 100 square feet per ton; 1/2 to 1 inch gravel, 90 square feet per ton; and 1 1/2 to 2 inches gravel, 80 square feet per ton.

What is self binding gravel?

Self-Binding Gravel is an easy to lay alternative to traditional materials such as flags, paving, macadam or concrete. The gravel binds together when rolled to provide a self compacted surface which remains firmer underfoot than conventional loose aggregate.

What do you put under gravel?

Using a membrane underneath you gravel driveway or path will prevent weeds whilst allowing natural elements to permeate through to the soil beneath. It also helps to keep your gravel clean by creating a barrier.

Are gravel driveways a good idea?

Advantages of Gravel Driveways. Affordable – Gravel's biggest asset is its affordability. Gravel is affordable, and because you dump it and spread it, the labor cost is also minimal. If you have a large-scale rural property or driveway and need to save money – gravel is a great choice.

Do I need a membrane under gravel?

Using a membrane underneath you gravel driveway or path will prevent weeds whilst allowing natural elements to permeate through to the soil beneath. It also helps to keep your gravel clean by creating a barrier. When laying membranes it is important to first prepare the ground properly.

How do I build a gravel parking area?

Start with large, rough gravel around the size of a baseball or softball and create a layer approximately 4 to 6 inches deep within your excavated space. These pieces will grind together under the weight of the gravel above them, locking them in place and creating a firm bedrock for your parking area.

How do I keep my gravel from moving on my driveway?

Gravel should be raked up onto the driveway, and tamped down until it's flat. Then the gravel should be wetted down with a hose, allowing the rock to shift and the dirt to accept the gravel once again. Don't use too much water, because you might cause the driveway to shift and the dirt to run.

How much is a ton of gravel?

Bulk crushed stone and gravel prices are $10 to $50 per ton on average. Road base costs $18 to $30 per ton, and plain pea gravel or limestone costs $28 to $45 per ton. Buying gravel in small quantities costs over $100 per ton. It takes 1.4 tons of stone per cubic yard.

How do you stabilize a steep gravel driveway?

Actually if you just throw a few bags of cement over the top before you grade next time it will mix in and help your base stabilize. just wet it after you grade it to help it go off. Just do the corner first to see if it works. The cement seeps through into the soil too.