How much chlorine do I put in my hot tub to start?

How much chlorine do I put in my hot tub to start?

You should aim for a level around 5 to 8 parts per million. Wait an additional 30 to 60 minutes before re-checking the free- chlorine level, and do not allow anyone to get in the hot tub until the chlorine levels have dropped between 2 and 4 parts per million, which is a recommended range by the way.

Can I use my hot tub without chemicals?

But seriously, the real answer is YES! You can run your spa without chlorine OR bromine, and still have a safe and sanitary spa. It requires using some modified methods to make sure that pathogens don't thrive, but it can be successfully done. Here's how.

How often do you need to change the water in a hot tub?

On average the water in most hot tubs should be changed every 3 months. If your hot tub is heavily used you may need to change the water more frequently or, if it only gets light use, then the water might be fine for a little longer than the 3-month average.

How often should I shock my hot tub?

Generally it is recommended that you shock your hot tub once a week – more often if it's seeing heavy use. If your levels are all good, but the water is a bit cloudy or doesn't quite smell right, it's time for a shock. You should also shock the tub if you haven't used it for an extended period of time.

How do I test my hot tub for bacteria?

Dip a hot tub test strip into the water. The test strips change color according to the level of chemicals in the water, and they come with a chart to help you interpret the colors. Use the chart to check the chlorine concentration in the hot tub. It should be around 10 ppm.

Should I leave my hot tub on all the time?

Yes, you should leave your hot tub on all of the time. Hot tubs are designed to always be switched on and it's more economical to keep the water hot than it is to heat it up from cold each time you want to use it.

How much chlorine do I put in a 300 gallon hot tub?

For a 300 gallon spa, 0.7 oz of Chlorine Granules shaken over the water surface, will raise the chlorine level up to about 10 ppm. This should be done with a balanced pH (in the low range of 7.2-7.4), and with the circulation pump running on high to help distribute the shock quickly.

Can I use chlorine tablets in my hot tub?

What Size Chlorine Tablets for a Hot Tub? Due to the water capacity, we do not reccomend using large 200g swimming pool tablets in a hot tub as they will lead to high levels of chlorine which could cause damage to components. Use 20g chlorine tablets only in hot tubs.

How long do you have to wait after putting chemicals in a hot tub?

How long do you have to wait to get into your hot tub after shock dosing it? If you are shocking the spa with Non Chlorine Shock then allow 10 minutes for it to all mix in and get right in. If you are using Chlorine granules then you must wait until the Chlorine level has returned to 5 PPM which may take 24 hours..

How long does it take to heat a hot tub for the first time?

If your hot tub is located inside, and the air temp is around 76 degrees, it will take about 4 hours to heat up your spa to 100 degrees. The lower the outside temps the longer you will have to wait before your spa is ready. Therefore, by leaving the cover on while it's heating up you can help it warm up faster.

How much chlorine do I put in a 500 gallon hot tub?

Shocking a hot tub requires about 2 ounces (4 tablespoons)of chlorine for every 500 gallons of water.