How long is a bicycle chain link?
How long is a bicycle chain link?
The bike measures 16-3/8″ from the center of the rear axle to the center of the crank bolt. The decimal equivalent for 16-3/8″ is 16.375 inches. In the example above, this becomes 32.75 + 10.5 + 8 + 1 = 52.25 inches. Chains cannot be joined at 52.25 inches, so this length is rounded to 52 inches.
What is a bicycle chain link?
Your chain is a key element of your bike's transmission, being the essential link that connects the front part of your drivetrain (the pedals, cranks and chainrings/sprocket) to the rear (cassette/sprocket and rear hub).
How often should I change my bike chain?
To avoid this accelerated wear of your cassette and chainrings, a general rule of thumb is to replace your bike's chain every 2,000 miles.
How often should you clean your bike chain?
If you are a frequent rider, using your bike several times throughout the week, your bicycle will benefit from a regular cleaning and lubrication of the drive chain. Bicycle Tutor recommends cleaning and lubricating your bike's drive chain at least once every month to maintain optimal performance and protection.
How do I know if my bike chain is worn?
Another ballpark method for checking chain wear is by measuring it with a ruler. Pick a rivet and line it up at the zero mark. Count 23 more rivets and your last rivet should be at the 12″ mark of your ruler. If it is off by more than 1/16″ your chain is stretched to the point of replacement.
How long does a bicycle last?
But given adequate maintenance and periodic replacement of dead components, bikes should last 50,000 miles or so. I usually get around to getting a new bike after 50,000 miles. But they can go farther than that.
How do I know my chain size?
Even so, road bike chains are strong enough for very strong riders, and even strong enough for mid drive e-Bike conversions (motor adds to the chain drive force) of 1,000 watts (1.3 horsepower) or more.
Are bicycle chains universal?
The sprocket teeth are cut for this same one-half inch standard to accept bicycle chains. However, this does not mean all makes and models of chains are interchangeable. There are two basic types of bicycle chains: “one-speed” chains, and derailleur chains.
What size is standard bicycle chain?
Bicycle chain comes in four basic widths: 3/16" (. 1875", 4.76 mm), used until the middle of the 20th century on many bicycles; this was inch-pitch chain. 1/8" (0.125", 3.18 mm) chain is used on most single-speed bicycles, and bicycles with internal gearing.