Articles 

How long does a Sony Cyber-Shot battery last?

Joe Ford

How long does a Sony Cyber-Shot battery last?

5.5 hours

How do I reset my Sony camera?

Depending on your camera:

  1. Select MENU → Settings → Initialize → OK.
  2. Select MENU → Setup → Initialize → Reset Default or Factory Reset.
  3. Select MENU → Setup → Navigate to Setting Reset → Camera Settings Reset or Initialize.

What happens when you reset your camera?

The Reset Default or Camera Settings function only resets the shooting settings of the camera to their default settings. Do not turn the camera off while resetting. The camera may show a blank screen for approximately 10 seconds after performing a reset. This is a normal operation and not a malfunction on the camera.

How do I change the date on my Sony Cybershot?

How to turn the date/time stamp feature on or off.

  1. Turn on the camera.
  2. Turn the mode dial to select SETUP .
  3. On the control button , press the UP ARROW [FIG.
  4. Press the RIGHT ARROW [FIG.
  5. Press the UP ARROW or DOWN ARROW to select Date/Time .
  6. Press the RIGHT ARROW .
  7. Press the UP ARROW or DOWN ARROW to select the desired time or date stamp setting.
  8. Press ENTER [FIG.

How do I display the date and time on my Sony Handycam?

The date and time are recorded automatically and can be displayed only during playback. To display them, select – [Setup] – [ Playback Settings] – [Data Code] – [Date/Time].

How do I set the date and time on my Canon photos?

Press the camera button as shown above (right and left), select [Date Stamp] and set it to [Date] or [Date & Time].

How do I put a timestamp on my photos?

Using Timestamp Camera Once inside the app, click on the clock icon in the lower right-hand corner. The icon will bring up a full menu of options to choose from. Unfortunately, to use this app you will have to forgo your native Android app and choose the Timestamp Camera app instead.

How do I turn on date stamp on Canon Powershot?

Set the option to automatically add a date stamp using the device’s menu functions.

  1. Turn on the camera and then press the “Menu” button.
  2. Press the right or left arrow key until you have the camera icon highlighted.
  3. Press the up or down arrow key until you have “Date Stamp” highlighted.

How do I turn on date stamp on Canon sx540?

Solution

  1. Press the button to turn the camera on.
  2. Press the button.
  3. Press the [ ], [ ] buttons to select the [ ] tab.
  4. Press the [ ], [ ] buttons to choose [Date] or [Date & Time].
  5. When [Date Stamp] is set to [Date] or [Date & Time], [ ] is displayed on the LCD monitor.

How do I remove the date stamp on my Canon camera?

Remove date stamp from photo – the easy way

  1. Step 1: Load the image. Open the image that you wish to remove the date stamp from.
  2. Step 2: Select the date/time stamp. Zoom in on the area with the date and time stamp, and then mark it with marker or any other selection tool.
  3. Step 3: Run the restoration process.

How do I remove the date stamp from my Canon camera?

When you arrive at the date stamp setting in your camera’s menu, just use the right or left arrow buttons to choose “Off”.

How do I find the date on my Canon camera?

  1. Press the button on the camera.
  2. Press the < > button.
  3. The following screen will appear on the LCD monitor.
  4. If you set [Date Stamp], [DATE] will appear on the LCD monitor.
  5. When shooting with this setting, the date will be embedded in the image as shown below.