How do I change the picture size on my Epson projector?
How do I change the picture size on my Epson projector?
Turn on the projector and display an image. Press the Lens button on the control panel repeatedly until the zoom adjustment screen appears, or press the Zoom button on the remote control. Press and hold the arrow buttons on the projector’s control panel or remote control to resize the image.
How do I reduce the screen size on my Epson projector?
Resizing the Image with the Wide and Tele Buttons
- Turn on the projector and display an image.
- To enlarge the image size, press the Wide button on the projector’s control panel.
- To reduce the image size, press the Tele button. Note: If the projector is installed out of reach, you can also adjust the image size using the Zoom setting in the projector menus.
How do I change the screen size on my Acer projector?
If you press the blue padlock icon next to the Throw Distance value so that the icon shows a Lock symbol, then moving the Zoom Slider will only adjust the Image Size bigger or smaller as would be visually represented if you turned the Zoom Lens ring on your projector’s zoom lens to make the image bigger or smaller.
How do I rotate the screen on my Acer projector?
On the remote control select Menu -> Extended and press Enter. Use the up/down arrows to get to Projection and change it to Front/Ceiling. On the remote control select Menu -> Setup-> Mirror -> V Invert.
What do you do when your projector says no signal?
Solutions When “No Signal” Message Appears
- Press the Source button on the projector repeatedly to cycle through the available sources.
- Turn on the connected computer or video source, and press its play button to begin your presentation, if necessary.
- Check the connection from the projector to your video sources.
Why did my projector stop working?
Projector Not Turning On Ensure the projector is properly plugged into a working outlet. Check the temperature lights to make sure the device hasn’t overheated and shut down. If you are using a remote control to turn on the projector, check the batteries. Be sure all of the projector latches are closed.