Articles 

How do couples pose naturally?

Joe Ford

How do couples pose naturally?

Have the couple walk toward the camera holding hands and looking at each other. Encourage conversation and natural interaction, which sometimes means the woman will put her other hand up on his arm as they’re walking or something equally as sweet.

Where should I focus when shooting a couple?

Personally, I’d put on the person closest to you, and then with sufficient DoF ensure the second person is also acceptable focussed. The reason, normally the DoF is distributed more or less 1/3rd in front of the field of focus, and 2/3rd behind it, so you have more “play” behind the plane in which you put your focus.

What F stop to use for couples?

This is a cropped in close from the image above. With her facing the camera more squarely, at f/2.8 I was able to get both eyes in sharp focus. For couple’s portraits or groups use a smaller aperture to make sure you get everyone in sharp focus, f/5.6 or f/8 will usually do the trick.

Where should I focus in a group photo?

How to Focus for Group Photos

  • Direct the Group to an Area Away From the Background.
  • Pose the Group With Depth in Mind.
  • Have Your Group Back Up (If Possible)
  • Set a Narrow Aperture.
  • Use Single Point Auto-focus and Find the Right Person to Focus On.
  • Focus and Shoot.
  • Checking the Photo and Troubleshooting.

How do I choose shutter speed?

As a rule of thumb, your shutter speed should not exceed your lens’ focal length when you are shooting handheld. For example, if you are shooting with a 200mm lens, your shutter speed should be 1/200th of a second or faster to produce a sharp image.

What is slow shutter speed?

Inside your camera, directly in front of the sensor, is a small flap called the shutter. Shutter speed describes how quickly or slowly the shutter opens and closes again. A fast shutter speed means that the shutter is only open for a short period of time; a slow shutter speed means the shutter is open for longer.

What is normal shutter speed for a camera?

1/60

How F stop is calculated?

This is because aperture is measured by f-numbers or f-stops, which is the ratio of the lens’ focal length divided by the effective aperture diameter. So if you take a 200mm lens and divide it by a 50mm aperture diameter opening, you end up with an f-stop of 4, or f/4.

What is one stop overexposed?

Specifically, one stop is a doubling of exposure, or a doubling of the amount of light that reaches your camera’s sensor. So you might say that an image that is overexposed by one stop, which means that you let in twice as much light as you needed to in order to get a correct exposure.