Can you use mesh drywall tape on inside corners?

Can you use mesh drywall tape on inside corners?

You can use mesh anywhere except inside corners. But mesh tape has one weakness (literally): It's not as strong as paper. To compensate, you have to cover it with setting-type joint compound, which is stronger than premixed compound (see tip below).

How many coats of drywall mud do I need?

If your wall has distinct crevices, cracks, or textured areas, or if your brand of drywall mud isn't offering enough coverage, you may have to do a couple of additional coats of compound. However, in general, you'll need one coat to fill in the seams and three more coats after taping.

Can you use all purpose joint compound with mesh tape?

Mesh tape. You can use mesh anywhere except inside corners. But mesh tape has one weakness (literally): It's not as strong as paper. To compensate, you have to cover it with setting-type joint compound, which is stronger than premixed compound (see tip below).

Can you overlap drywall tape?

Applying a single layer of paper tape will help minimize any chance of ending up with a bulge in the finished wall. When you tape horizontal joints, cut the tape so it fits between the vertical joints without overlap.

How do you cover drywall tape?

If you've already used mesh tape and mudded over it (and it's still showing), keep applying thin final coats with a 10- or 12-inch drywall knife, gradually building up the joint in the middle—to cover the tape—and feathering it out at both sides to make it all look flat.

How do you tape drywall seams with paper tape?

Scoop up a large lump of compound and lay it in quickly, completely filling the tapers (Photo 2). Lay on the paper tape and lightly smooth it into the mud with your knife (Photo 3). Finally, spread a thin coat of mud over the top of the tape. Make light strokes with your knife.