Common questions 

Which Honda is the fastest?

Joe Ford

Which Honda is the fastest?

Honda NSX

What is Honda ferio?

Sedan. In Japan, the standard four-door Civic sedan was called Civic Ferio and sold at Honda Primo dealerships, while a more upscale version was called the Honda Domani and sold at Honda Clio dealers. In Japan, the Ferio name was used from 1992 until 2006 on all sedans, regardless of trim packages installed.

What is an Eg6?

Eg6 is a 5th gen civic SiR hatchback that came with a b16a engine. bingo. ’84-’95 Civic/CRX. USDM 1984 CRX DX 1300 AE5. JDM 1983-1987 CR-X 1.3 AE5.

Which K24 is best for boost?

The best combination for good power and good torque would be the k20/k24 head and block combination.

How much HP can K24 handle?

The max flow on a K24 is rated around 37lbs/minute. You can expect about 370 hp at the crank (give or take) when the K24 is pushed to the limit. Of course you can try to push past this limit, but you will hit the point where you run into diminishing returns.

Why is the K24 so good?

However, the K24 offers good power output. It is a larger engine and has more torque, too. The K24 is also easier and less expensive to tune. There are a number of tuning mechanisms available for the K20, however, and it is a more common engine with more readily available parts.

How much does a K24 swap cost?

We Finish This Accord-Based K24 Swap And Save $3,600!

PART TYPICAL COST PAID
Engine $2,500 $400
Transmission $1,000 $350
ECU $250 $150
Wire harness $250 $100

Does K24 have VTEC?

This motor has no VTEC mechanism on the exhaust cam and runs on 12 valves before 2200rpm with the other 4 slightly opening. It also has smaller ports than the Type S and Type R.

Why put a k20 head on a K24 block?

It is very compatible in performance with the Type S head. I’ve even heard some others say that in some ways it is better… All of the other heads are no good. The Type S has a way better head design and flows much better than the CRV/Accord/Element heads…. But the 2.4L blocks are the key to making more power….

What cars use K24?

While the high-revving K20A appeared in cars like the Acura RSX and Honda Civic Si, the 2.4 liter K24 is even more plentiful in the US market where it’s powered millions Accords, CRVs, TSXs and many other Honda and Acura products.

What’s the difference between K24A2 and k24a4?

the only other difference is you can bolt a k20 head directly to a k24a1 or k24a2 block without having to change the pistons… if you use a k24a4 block you need to change the pistons to either stock tsx pistons, crv pistons or aftermarket. you can use the stock rods with any pistions you choose.

What cars use the K series engine?

Found in:

  • 2001-2006 Honda Integra Type S (DC5)
  • 2000-2005 Honda Stream S (RN3) (front drive)
  • 2000-2005 Honda Stream S (RN4) (all-wheel drive)
  • 2004-2009 Honda Edix (front drive and all-wheel drive)
  • 2005-2008 Honda Accord Sedan (front drive and all-wheel drive)
  • 2005-2008 Honda Accord Wagon (front drive only)

Is K series better than B Series?

“Their is an advantage to sealing strength on [B series] cylinder heads for heavily boosted applications due to the smaller bore and spacing which allows for closer head bolt location relative to the cylinder,” said Ragains. The K series (left) has more material around the cylinder sleeves than the B series (right).

What’s the difference between k20a2 and k20a3?

k20a2 is an acura type s motor… where as a k20a3 is an EP3/base rsx motor. They both have the same VTC. The A3 in the Si (only the Si not the base rsx) has stupid Balanceing shafts.

Are K20 engines reliable?

K20 Overall Reliability Nonetheless, we want to reiterate that the K20 is a highly reliable engine. It shouldn’t have any major issues on the road to 200,000+ miles. Some K20 owners won’t experience any of the issues we referenced in this post.

How much HP can a stock K20 handle?

The K20 motor can handle about 318-326hp with no problem. But if you want more hp change out the rods and pistons.

How much does a K20 engine cost?

For the k-series that have true vtec, with cost of motor and trans included, right around $9000 to do it right. You could probably shave off $1000 or more by finding deals on used parts, but you get the idea.

What does Type R stand for Honda?

1 New Honda Civic Type-R Available Now! “R” stands for “Racing”, but it could also stand for “Rare”. The stunning, high-performance Honda Civic Type R is always in high-demand, so Primo Honda feels very fortunate to regularly have one or two of these exceptional vehicles available for our customers.

What RPM does VTEC kick in k20?

2300rpm

Is the K20A3 a good motor?

The K20A3 has the power of a B16, more torque though. It is a decent motor compared to the B-series.

How much boost can a k20a2 handle?

Registered. Theres some out there boosting 20 psi. If you go with a gt3076r, you will have good spool time(3500 rpm full boost) and make your goals. If 300 or 400 is your goal, you should have no problem with the stock motor.